Pro Tapes Pro-Gaff Gaffers Tape: 1 in x 55 yds. (Black)

Pro Tapes Pro-Gaff Gaffers Tape is a high strength vinyl coated cloth tape with a matte finish. It has a high performance adhesive system and is highly conformable to irregular surfaces. Pro-Gaff has a waterproof backing, is abrasion resistant, and has a smooth, controlled unwind, and is hand-tearable. Engineered for demanding applications such as wire and carpet hold down, vinyl school bus seat repair, gaffing lights, spiking, color coding, climbing wall route setting, marking boxes, stage and set decoration, splicing floors and bundling wires. Pro-Gaff Gaffers Tape is water and temperature resistant, removes cleanly from most surfaces, and resists tears and punctures. 1 inch Pro-Gaff is also used as a route setting tape on rock climbing walls. It comes in the widest array of colors of any of the gaffers tapes we sell including colors can't get in any other gaffers such as electric blue, purple, tan and teal. This is a very dependable product used throughout the entertainment industry. Also used in fencing as a foil tip tape or point tape. Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 24mm x 50m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. In the photo the colors are the following (starting from the leftmost column and working down): Olive Drab, teal, Grey, Purple, Brown, Electric Blue, Burgundy, Green, Yellow, Red, Black, White, Tan and Dark Blue.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: vinyl coated cloth
- Adhesive: synthetic rubber
- Thickness: 11 mils (carrier, adhesive)
- Adhesion: 80 ounces per inch (to stainless steel test panel)
- Tensile Strength: 50 pounds per inch (longitudinal)
- Service/Operating Temperature: 50F to 200F
- Elongation: 5 %