1400W 48V Electric Trolling Motor Outboard Motor Fishing Boat Engine Brushless

Description
With the Characteristic Foldable Handle, the Strong Load-bearing Capacity, and a Brushless Pure Copper Motor, This Trolling Motor Is a Great Motor for a Variety of Applications. the Foldable Handle Has Two Buttons to Adjust the Steering State and the Machine Can Be 360° Rotated, Allowing for More Comfortable Steering. in Addition, with the Large Led Display, You Can See the Voltage Clearly and Ensure Electrical Safety.

Details        
Heat Dissipation Holes: There Are Many Heat Dissipation Holes on the Engine, Which Can Help the Motor Dissipate Heat and Prolong Its Service Life.

Clamping Device: We Provide You with a Clamping Device That Is Used to Tighten and Secure the Machine to Prevent It from Dropping.

Ergonomic Handle: Its Handle Conforms to the Ergonomic Design, Making It Comfortable to Hold.

Powerful Propeller: the Reinforced Propeller with Two Blades Is More Durable and Impact-resistant. It Has a Good Anti-entanglement Effect and Can Cut off Water Plants with High-speed Rotation.           

Adjustable Bracket: the Plastic Hung Bracket Is Reinforced to Be Firm and Durable. It Can Be Adjusted to Different Heights to Adjust Its Depth into the Water, Meeting Different Needs.           

Application
It Is Suitable for Kinds of Boats with 13.1-22.96ft Lengths Such As Inflatable Boats, Canoes, and Aluminum Fishing Boats, Widely Used in Fishing, Aquaculture, Outdoor Adventure, Fresh Water and Saline Water Area.  

Specifications
Material: Aluminum Alloy, Copper, Iron, Plastic
Surface Treatment: Spray Painting
Color: Black
Operation Mode: Electric
Mounting Type: Transom, Engine
Starting System: Switch Knob Added
Motor Type: Brushless Motor
Plug: National Standard
Voltage: 48v
Maximum Power: 1400w
Speed: 2300rpm
Maximum Load-bearing Capacity: 1250-1500kg/2756-3307lbs
Net Weight: 11.5kg/25.35lbs
Gross Weight: 13kg/28.66lbs
Battery Cables Length: 1.3m/4.3ft
Total Height: 1m/3.28ft
Handle Length: 44cm/17.32inch
Machine Head Size: 26*12*8.5cm/10.23*4.72*3.34inch
Propeller Size(L&W): 26*11cm/10.23*4.33inch
Package Size: 116*40*17cm/45.67*15.75*6.7inch

Package Included
1* Electric Trolling Motor   
1* Chinese Manual   

 
Notes
1.the Machine Should Be Hung Vertically in the Middle of the Stern Plate. If the Propeller Is Too Deep, It Will Increase the Assistance of Water, Thus Reducing the Thrust. If It Is Too Shallow, It Will Make the Propeller Idle. the Appropriate Depth Is Between 15-20cm/5.9-7.87 Inch.
2.the Actual Battery Life Depends on Your Battery. Speed Depends on Many Factors Such As Load, Water Conditions, and Wind Speed. It Is Difficult to Give an Exact Speed Rating, and We Will Only Give the Approximate Reference Speed.
3.One 50ah 48v Lead-acid Deep Cycle or Lithium Deep Cycle Battery (Not Included) Is Required. Do Not Use Batteries Above 48v and 100a.
4.the Motor Needs to Be Flushed with Fresh Water After Each Use, Which Can Extend Its Service Life.
5.Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before You Order.