Descriptions:
* brand new and high quality.
*The brass coupling is a through hole connecting two optical axes of different diameters, or connecting motors and an optical axle, or connecting axes of different diameters.
*It can be used as either a screw rod or a transmission between the propeller shaft and the motor of a model remote control ship.
*Side screw holes are unified as M3. Each coupling is supplied with four screws.
*There are many kinds of joint couplers on sold. For example "2mm to 5mm" means the apertures diameter at both ends were 2MM and 5MM respectively. Please choose the correct sizes to purchase.
Specifications:
*Material: brass
*Diameter of both ends of cross section: 9mm
*Intermediate diameter of cross section: 7mm
*Total length: approx.20mm
*Optional sizes:
2mm to 2mm
2mm to 2.3mm
2mm to 3mm
2mm to 3.17mm
2mm to 4mm
2mm to 5mm
2mm to 6mm
2.3mm to 2.3mm
2.3mm to 3mm
2.3mm to 4mm
3mm to 3mm
3mm to 3.17mm
3mm to 4mm
3mm to 5mm
3mm to 6mm
3.17mm to 3.17mm
3.17mm to 4mm
3.17mm to 5mm
4mm to 4mm
4mm to 5mm
4mm to 6mm
5mm to 5mm
5mm to 6mm
6mm to 6mm
Package Contents:
1 x brass coupling
4 x screws
1 x wrench
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
WARNING: 