DJI Inspire 1 RAW Bundle with Zenmuse X5R, 4 Batteries, Remote Harness, Dual Remotes & more...

DJI Inspire 1 RAW Quadcopter with Zemuse X5R 4K Camera and 3-Axis Gimbal: A Micro Four Thirds CMOS sensor with 4K image capture and RAW recording is introduced to DJI'squadcopter line with the Inspire 1 RAW featuring the Zenmuse X5R camera and gimbal system along with a 15mm f/1.7 lens. Forgoing the fixed landing gear design found on many earlier quadcopters, the Inspire 1 features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards or SSD drives and can also beam a live 720p feed to a mobile device running the DJI GO app or a monitor or FPV glasses with an HDMI input. Two transmitters (radio controllers) are included so that one operator can pilot and another can pan and tilt the camera. As with many other multi-rotor systems, the Inspire 1 relies on a GPS-based stabilization system that - thanks to spatial awareness - is able to hold a position even when experiencing wind interference, can compensate for overzealous pilot inputs to help avoid stalling, automatically brings the aircraft home in the event of signal loss or at the press of a button, and makes possible a number of semi-automated flight modes that can be enabled through the app. There is also an "indoor" mode which relies on Vision Position technology - combining optical flow with ultrasonics - to provide stability indoors or in other contexts where GPS is unavailable (Note: certain features will be unavailable in indoor mode). What Ready-to-Fly Means This Inspire 1 bundle comes ready-to-fly (RTF). This means a pre-bound transmitter (radio controller) is included and that no major assembly is required in particular, no assembly that requires soldering. It is important as with any multi-rotor to follow the user guide to ensure proper calibration before embarking on your first flight Integrated 4K Camera with MFT Mount and 15mm Lens Micro Four Thirds Sensor with MFT Mount Sporting a Micro Four Thirds CMOS sensor, the Inspire 1 RAW introduces mirrorless camera performance to the Inspire series. The featuring a standard MFT mount, the Zenmuse X5R camera includes the Panasonic Lumix 15mm f/1.7 lens, and also works with the separately available Olympus M. ED 12mm f/2.0 lens 4K and HD Video Capture The Zenmuse X5R is able to capture video at up to DCI 4K 4096 x 2160 at 23.98p or UHD 4K at 29.97p RAW Video Recording In addition to H.264, the X5R features Cinema DNG RAW recording, which minimizes compression while maximizing latitude for image manipulation in post 16MP Stills Capability Not just for video, the Zenmuse X5R can snap still from the air at up to 16MP resolution. In addition to single-shot, the camera support busts of 3, 5, or 7 frames and can take time-lapse at stepped intervals of between three and 60 seconds. Photos are captured in either JPEG or DNG RAW. With the X5R, in addition to full-auto, Program, Shutter Priority, Aperture Priority, and Manual exposure modes are provided 3-Axis Gimbal The Zenmuse X5R camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitter Live HD View A real-time feed from the Zenmuse X5R camera can be displayed in 720p HD on a mobile device or HDMI monitor, making this it a great choice for FPV (first-person view) flying as well as enabling videographers and photographers to monitor framing from the ground. This is made possible by the inclusion of the DJI Lightbridge system within the flight electronics, which features a range