Specification:
Model Number: Fan Controller
Working voltage: DC12V
Power control: can be equipped with 8 fans at the same time, PWM fan speed control, 4-wire fan or 3-wire with PWM speed control port can be used universally, note that the fan interface sequence is commonly used. The maximum power of a single fan is within 60W, and the total power is within 300W (note that the total power depends on the power supply of the chassis)
Quiescent current: 0.015A (standby state)
PWM duty cycle: 0%-100%
PWM frequency: 25khz
Size: About 60x35x16MM/2.36x1.37x0.63in
Note:
1. This model is PWM speed regulation, the speed regulation frequency is about 25K. PWM is the speed control signal, P is the positive pole of 12V, and G is the negative pole of 12V. Do not make mistakes in the wiring sequence, otherwise it will be damaged.
2. Only fans with PWM speed control function can be used, and PM speed control line is required.
3. When using this speed controller, make sure that the fan has PWM speed control function and is connected correctly. Follow the correct wiring sequence to avoid damage to the equipment. The total power should take into account the power limitations of the chassis power supply.
4. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
5. Please allow 1-2cm measuring deviation due to manual measurement.
Included:
1 x Fan Controller
WARNING: 