Hallowell 465C18EV-PT 400 Series Stationary Ventilated Combination Cabinet, 48W in. x 18D in. x 72H in. , 729 Parchment, Single Tier, Double Ventilated Door, 1-Wide, Knock-down

Fabricate cabinets square, rigid and without warp, with metal faces flat and free from dents or distortion. Make all exposed metal edges safe to touch. Weld frame members together to form rigid, one-piece structure. Weld, bolt, or rivet other joints and connections as standard with manufacturer. Grind exposed welds flush. Do not expose bolts or rivet heads on fronts of cabinet doors or frames.

• Type - Double Ventilated Door
• Finish - Parchment
• no bolt heads show on front or on side panels
• positive three point locking (top, center and bottom) and theft resistant hinges for security
• chrome-plated locking handle has built-in grooved key cylinder lock
• shelves easily adjust up or down in 2 in. increments
• tripleflanged shelf front for added strength
• doors swing out quietly a full 180 in. and are 'HAT' section reinforced
• corner foot gussets provide added rigidity and stability
• 22 Gauge body
• 22 Gauge Shelves adjust on 2 in. center
• 22 Gauge door with 16 Gauge frame
• 16 Gauge continuous piano hinge
• 200 lb shelf capacity
• Doors include key lock and 3-point turn handleb
• Dimensions - 48 W x 18 D x 72 H in.

• All cabinet parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish.

• Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on both latch and hinge side vertical members. Cross frame members of 16 gauge channel shapes shall be securely welded to - SKU: HLWL4024