Blueek 50g DIY Polymorph Thermoplastic Polycaprolactone Moldable Plastic Pellet

"

50g DIY Polymorph Thermoplastic Polycaprolactone Moldable Plastic Pellet

Specification:

• Good dissolubility

• High crystallinity and low melting point

• Good ductility (Tg: -60C ) ; Melting point is 58°C -62°C.

• Temporary , and more DIY Crafts, Tools, Grips, Repairs, Games, Costumes, Jewelry, Robot parts.

• 1. Simply heat the pellets in water to over 42°C (Needs water that's been boiled).

• 2. Leave the pellets to melt in the water until they turn transparent.

• 3. the pellets from the water and mould by hand (add color at this stage if required)

• 4. Allow the polymorph to cool until.

• 5. Re-heat if further molding is required.

Warning:

• 1. Never heat polymorph over 200 ºC as this will damage the polymer.

• 2. Wait around 5 min it cools down before you reheat and reshape it again.

• 3. Do not . if swallowed.

• 4. Product should be ok to use for children 10+

• 5. Product may become hot.

• Material: Polycaprolactone

• Size: 4mm

• Color: White

Package Include:

• 1 Bag polymorph Thermoplastic

"