TOOL1SHOoo Drawer Slides Set of 2, Heavy Duty 500LBS Side Mount Ball Bearing Full Extension Drawer Slider with Lock 40 inch

500lbs heavy duty drawer slides ball bearing full extension with lock. 12/14/16/18/22/26/28/30/32/34/36/38/40/60 inch steel drawer slides are available.These heavy-duty drawer slide is suitable for modifying RV equipment, heavy-duty tool cabinets, shelves, cabinets, industrial drawers, trucks, vending machines, etc.

Features:

1. Heavy Duty: Cold rolled steel drawer slides with anti-oxidation and anti-rust galvanized finish, sturdy, rust-resistant, not easily deformed, and can be used for about 100,000 times.
2. With Lock: Locking device prevents the drawer from accidentally sliding out. Unlock the drawer by gently tugging the lock handle.
3. Full Extension: This 3-fold heavy-duty drawer slide support access to the entire space, and drawers can be pulled out completely. The pull-out distance is longer than the double-section ones.
4. Push and Pull Silently: With double rows of solid steel balls and buffer cushion to ensure a silent and smooth push and pull. 
5. 500lbs Load-bearing Capacity: Maximum load capacity of 226.8kg/500lbs. You can use it with confidence.
   
   

Specifications:

• Material: Cold Rolled Steel Q235
• Color: Silver
• Quantity: 2
• Process: Galvanized Finish
• Load-Bearing Capacity: 226.8kg/500lbs
• Slide Length: 101.6cm/40in
• Slide Width: 7.6cm/3in
• Package Size: 110*18*6cm/43.3*7.08*2.36in
• Gross Weight: 10.2kg/22.67lbs

Installation Steps:

1. Find two horizontal lines in the installation position on both sides of the cabinet, and fix the outer fixed slides to the horizontal lines on both sides with screws; (Note: the positioning of both sides must be parallel).
2. Completely pull the slide rail, and fix the drawer to the inner fixed rail with screws according to the horizontal line.
3. The installation is finished.
   
   

Notes:

• Please note that the locking mechanism only works when the drawer is fully closed or fully open.  
• Please note that in order to ensure the safety of users, the heavy-duty slide rails cannot be disassembled.
• Please note that screws are not included in the package, you need to purchase your own M4 and M6 half-round head screws.
• Please note that the installation gap on both sides should be more than 20mm/0.79in.
• Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.