Schlage F62-Cam-Sie Double Cylinder Camelot Handleset - Bronze

Schlage F62-CAM-SIE Double Cylinder Entrance Handleset with Interior Siena Knob from the Camelot Collection Specifications: The distinctive design of the Camelot combines architectural inspired arches with graceful curves. The two-piece design offers flexibility for doors with non-standard hole locations while providing a classic appearance for smaller entranceways. Camelot double cylinder handle set with Siena Interior Knob The deadbolt is thrown or retracted by a key from either side. Door latch is retracted by a thumb piece from the outside or by the inside lever Bolt automatically deadlocks when it is fully thrown. Installation should be in accordance with existing codes only, to ensure life safety emergency egress. For Right or Left handed applications Solid Brass Exterior Trim Wrought Brass Interior Trim Lifetime Limited Mechanical and Finish Warranty Exterior Handleset Height: 12-7/8" without the deadbolt Exterior Handle Projection: 2-7/8" Interior Knob Diameter: 2-9/16" Interior Rose Diameter: 2-3/4" Interior Knob Projection: 2-3/8" Deadbolt Features: Utilizes the new B-Series deadbolt with increased security and easier installation! 1/2" of bolt left in housing when bolt is thrown for added kick-in resistance. Integrated anti-pick shield with Snap and Stay self adjusting tension provides added security and simplifies installation 1" Edge bore door preparation required for larger bolt housing Zinc bolt has hardened steel pin inside that spins in response to sawing attacks which prevents cutting or sawing Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance Adjustable backset with the industry's only helical design that locks into place with no adjusting during installation Works for both 2-3/8" and 2-3/4" backsets. ADA compliant thumb turn Faceplates Part 12-326: Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates Strike Plates Part 10-269: Supplied with a Round