ANCEL BST100 Car Battery Tester Charger Tester 12V Battery Analyzer 100-2000CCA Voltage Battery Test Car Battery Charging Circut Load Tester Tool Batteries Scanner 12 Volts Automotive Battery Checker

⚠️ Note: Ancel BST100 only supports the battery detection function and does not support charging.

Ancel BST100 battery tester is used for testing the conditions of the 12V lead-acid starting battery for cranking system and charging system. It comes with a large backlight LCD screen and it supports classic touch-tone to help you read and operate more efficiently. It utilizes the 4-wire Kelvin method to complete the collection of a series of complicated data for calculating every testing data with a build-in precise circuit and improved digital processor. Moreover, some circuit improvements including polar reversal protection, over-voltage input protection, and loose lead detection, ensure safety and convenience during testing.

💥Ancel BST100 Functions:

1. Identify battery status Good or Replace

2. Check Battery Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.

3. Check Internal resistance value (Ohm)

4. Display battery life in percentage (%)

5. Battery Cranking Test, load test

6. Battery Charging Test, Ripple Test

7. Support battery ripple test and review test data

💫12V Battery Tester Features:

1. Fast and smooth running speed with STM-32 chip set hardware

2. Accurate test results, using high precision amplifier and calibrated by professional battery testing tool, BST100 reading accuracy up to 99%.

3. Wide testing range cover from CCA 100- 2000, 3- 220 AH, best in the market.

4. Industry initiative graphical battery voltage real time monitoring, can be analysis battery data more accurate.

5. Unique battery results display in percentage and meter mode.

6. Test all automotive cranking battery, including ordinary battery, AGM flat plate battery, AGM spiral battery, and Gel battery, etc.

7. Polarity reverse connection protection, reverse connection will not damage the tester or affect the vehicle and battery.

8. Directly test the battery with loss of electricity, no need to full charge before testing.

9. Testing standards include currently the world's majority of battery standards, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.

10. BST100 is used to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL EPB cell

🎁Package List:

1 * Ancel BST100

1 * User's Manual