Alla Lighting 5200lm AL-R HB4 9006 LED Yellow Fog Lights Bulbs Xtreme Super Bright 9006 LED Bulb 12V LED 9006 Bulbs Upgrade for Cars, Trucks w/ 9006 Fog Light

Well, this was a relatively easy swap out of LED bulb elements. At the outset, I should say that I am pleased with the new bulbs. The result was a brighter and cleaner light pattern. If you have never done this before, first look up your vehicle on Alla's website, or use the vehicle part's locater on the online catalog that you are buying from.. First it is always a good idea to disconnect the negative ground cable from your battery. Next locate the bulb locations on your vehicle. Most makes and models of vehicles are different but the process is the same. Next disconnect the electrical connector by pushing in the locking tab and pulling the connector free. The bulb can be removed from it's housing by gently twisting it counter-clockwise about one eighth of a turn. Pull the bulb out and replace it with your new bulb. Be careful not to touch the LED's with your fingers to keep them clean. Reattach the connector and you are almost done. It's time to “clock” the LED bulb, which ensures the correct beam pattern is produced from the headlight housing. This involves adjusting the position of the LED chips. This means that the skinny part of the LED unit is facing up and down. My Alla light kit came with a small Allen wrench that allowed me to rotate the inner element holder to the proper position to produce the most effective and balanced beam pattern.

This bulb was easy to install, at least once you get into the enclosure on your car. The plug was a snug fit. Once installed it looks bright at nigh and clear white color. The aluminum housing should help with heat dissipation from that many LEDs too.