U.S. Solid 1/4" NPT Electric Pneumatic Solenoid Valve DC 24V 3 Way 2 Position Normally Closed

The U.S. Solid 1/4" NPT 3 way 2 Position Pneumatic Electric Solenoid Valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems. This valve allows pneumatic control of position, flow, pressure and temperature.
This valve is a 3/2 valve which means the valve has three port connections and two flow positions. One valve seal always remains open and the other closed in the de-energized mode. When the coil is energized, the mode reverses. Either the compressed air flows from port 1 to port 2 through the valve, or 1 is blocked while port 2 is exhausted via port 3. This valve is made with an aluminum alloy and has an aperture of 1/4".
Pneumatic types of valves can be found in a wide array of industries. Aircrafts use pneumatic valves to control the pressure and flow of hot engine air to the windshield for the anti-icing and rain removal. Food and beverage manufacturers use them to make, dispense or preserve food and beverage products
U.S. Solid pneumatic valves offer reliability, low power consuming, and have a long life. They are have prewired connections that makes installation, maintenance, and control simple.
SPECIFICATION
Valve Type: 2 Position 3 Way
Thread Type: NPT
Operation/ Property: Normally Closed
Material: Aluminum Alloy
Size: 1/4"
Voltage: DC 24 V
Applicable Media: Filtered Air
Power Rating (W): 4
Aperture (mm): 16
Flow Value (Cv): 0.89
Insulation & Protection: Class F; IP 65
Working Pressure: 0.15 ~ 0.8 Mpa
Direct Operated/ Pilot Operated: Pilot Operated
Operation Temperature: -5°C - 50°C