Rockville W12T4S2 12" 1400w Subwoofer in Behind Seat Ported Truck Enclosurer Box

Package Includes:
(1) Rockville W12T4S2 12" Shallow Mount 1400w Peak Car Subwoofer 2-Ohm Sub 350w RMS CEA Rated
(1) Rockville REC122 Single 12" Ported Behind Seat Truck Subwoofer Enclosurer Box
(1) Complete Single Sub Box Enclosure Installation Kit: Speaker Wire, Screws, Spades

Video of T4 Series Shallow Mount Subs:

Features:
Rockville W12T4S2 12" Shallow Mount 1400 Watt Car Subwoofer, CEA Compliant, 2-Ohm
Peak Power Handling: 1400 Watts
RMS Power Handling (CEA-2031 Compliant): 350 Watts RMS
2" voice coil
Ultra-Stiff Paper Composite Cone
3D Molded High Gloss Acrylic Dust Cap
Ultra Slim, Expanded and Rolled Steel Basket
High Density Laminated Butyl Rubber Surround
High Power Strontium Magnet with Ultra Saturated, High BL Motor Gap
Vented Core Magnet Motor Structure
High Temperature Aluminum Voice Coil Former
Lightweight Compact Design Ideal for Any Installation
Rubber Magnet Boot
Dual Chrome Plated Spring Loaded Push Terminals
Shallow Mount Subwoofer
Impedance: SVC 2 Ohm
Cutout Diameter: 10.98 Inches
Mounting Depth: 3.7 Inches
Frequency Response: 34 Hz to 500 Hz
Sensitivity: 89dB @ 1w/1m
Enclosure Recommendations:
Sealed: 0.67 cu. Ft - 1.7 Cu. Ft.
Vented: 1.00 cu. Ft - 2.0 Cu. Ft.

Owner's Manual

Features:
Single 12" Ported Truck Style (Behind Seat)
Finished with Durable Bed Liner
Universal Truck Application, Behind Seat
3/4" MDF

Specifications:
Air Space: 1.88 Cubic Feet
Mounting Depth: 5"
Height: 14.5"
Width: 40"
Top Depth: 5"
Bottom Depth: 8"
Tuning Frequency: 40HZ

Features:
10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
12 Feet of 14 AWG Blue Speaker Wire
2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.