Treedix XL4015 DC-DC Step Down Module High-Power LED Constant Current Drive Module with Voltmeter Display Compatible with Battery Charging

Specification：
Input voltage: 5-36V
Output voltage: 1.25-32V continuously adjustable
Output current: adjustable, maximum 5A (Recommended to use within 4.5A)
Output power: maximum 75W (Recommended to use within 50W, please reduce the power when using large pressure difference)
Working temperature: -40~+85 degrees
Working frequency: 180KHz
Conversion efficiency: up to 96%
Short circuit protection: yes
Over-temperature protection: Yes (output is automatically turned off after over-temperature)
Input reverse connection protection: None, (if needed, please connect a high current diode to the input)
Installation method: 4 pieces of 3mm screw
Wiring method: terminal or welding terminal, V-IN is input, V-OUT is output
Module size: 68.2 x 38.8 x 15 mm

Package included：
1 x XL4015 DC-DC Step Down Module
1 x Heatsink
4 x Screw sets

Note:
The input ground and output ground of the module should not be together. This will cause the bypass of the current sampling resistor of the module, so that the module cannot adjust the output current, and it is easy to burn the module when connected to the load.
There is a current sampling resistor at the output end of the module, and a voltage drop of 0~0.2V after connecting the load is normal.