Little Giant Universal Ice Machine Replacement Pump 115/230V RIM-U # BRPAP1

• 1/25 hp, 3165 RPM, 115/230 Volts
• 1.5/.75 amps., 50/60hz.
• Sealed Ball Bearings
• Overall Height 9 3/4" (Not including 1/2" top studs)
• Cord Length: 32" (4 Lead wires-Dual Voltage). No plug on cord.

Five Discharge Adapters: 1/2", 5/8", 3/4", 1", "Y"; Three Impellers: 1.75" dia., 1.955" dia., 2.10" dia.; Check Valve: No; Tubing: No; Safety Switch: No; Bracket or Cup: No; UL or CSA Rating: No. California Proposition 65 applies to this pump.

Disassembly Procedure: REQUIRED ONLY when using your existing mounting bracket and/or replacing the impeller, motor etc.
1. Remove base plate by pressing tabs with thumbs or tapping gently with plastic mallet.
2. Press impeller against pump stand and remove impeller nut and screw.
4. Remove impeller.
5. Remove thumb nuts and washers.
6. Remove pump stand.
Note: These instructions come with the pump, includes reassembly procedure

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

We do not have a replacement motor for this ice machine pump