Scope of application:
304 stainless steel tube is suitable for all kinds of neutral corrosive liquids.
750W：Edible oil, sewing machine oil, hydraulic oil, diesel oil, water, wine, kerosene and other diluted liquid and medium viscosity liquid.
1500W：Glycerin, honey, resin, oil, detergent, gear oil, edible oil, sewing machine oil, hydraulic oil, diesel oil, water, wine, kerosene and other diluted liquid and medium and high viscosity liquid.
Parameters:
Rate of flow:0-120L/min
Inlet pipe diameter:42mm
Outlet pipe diameter:32mm
Speed:10000 RPM/min
Power:750W
Voltage:220V
Current:4.8A
Lift:3-8M
Note:
1, When the operation, should be on your feet, hands clasped tools and auxiliary joystick, prevent tool from the reaction of | up the risk of damage.
2, During operation, please place the power cable at the end of the tool to prevent the power cable from being wound by the rotating part of the tool.
3, In the use of abnormal noise, should be immediately shut down, check the cause, until trying to eliminate the rear can continue to use.
4, The pump should not be empty operation, use suction immediately stop the pump, otherwise it will wear out, universal joint impeller, serious damage to the pump pipe.
5, Replace the brush: brush worn out to can not be used should be replaced immediately, otherwise it will damage the commutator, serious will burn out the motor.
Item Included：239521
TECHTONGDA Oil Transfer Pump Stainless Steel Oil Liquid Fluid Transfer Pump Stepless Speed 220V 750W
