For Kubota Yanmar Cub Cadet EP500-0 EP-500-0 FP7901-017 12V Universal Low Pressure 3-5 psi Petrol or Diesel Electric Fuel Pump
Application:
For Kubota For Yanmar For Cub Cadet.etc
Compatible with the following part Numbers:
12585-52031
12585-52030
035000-0460
68371-51210
EP-500-0
200J360FP
Voltage: 12V.
Current: 0.35A.
Pressure: 5PSI.
Flow: 80-120L/H.
Dimensions and Materials:
Material: Made of high quality brass and metal.
Features and Benefits:
1.100% quality assurance tested,easier installation.
2.Enables engines to burn fuel more efficiently and cleanly without emissions.
3.No diaphram, free flow
4.Consistent fuel flow at low range electrical amps.Very energy-efficient.
5.It is also long-lasting, with no internal rubber parts or bellows to wear out.
Installation Notes:
1. Disconnect the battery. Unload the mechanical fuel pump (up to you).
2. Select an area near the existing fuel line of the tank to install the pump.
3. Connect the fuel line from the tank to the fuel filter and connect the filter to the air intake of the pump.
4. Connect the carburetor transfer line to the pump outlet.
5. Connect the power cord of the fuel pump to the (P) terminal of the fuel switch.
6. Connect the wire to the (I) terminal of the oil switch to the on 12 volt supply controlled by the ignition switch
7. Connect the wires from the normally closed starting system to the (S) terminal of the oil switch.
8. Start the engine to check for work or leaks.
Package Included:
1 electronic fuel pump.
