110V 3000W Mini Electric Tankless Water Heater Instant Hot Kitchen Heater

Our water heater uses a stainless steel heating core with 3000w large power, providing you with instant and constant hot water and allowing for a comfortable washing experience. In addition, it adopts multiple protection designs such as leakage protection, dry-heating protection, and grounding protection, ensuring high safety of water use. The mini body and modern appearance make it a great companion for a sink and faucet.  It is suitable for kitchen water, daily washing, RVs, bars, schools, hospitals, communities, hair salons, and so on to wash hands, dishes, and face.

Specifications

Model: XY-FC

Color: White

Material: Stainless Steel, ABS, Brass

Process: ABS Particle Injection Molding

Shape: Rectangular

Style: Mini, Instant

Mounting Type: ‎Wall-mounted, Vertical

Usage: Indoor Use

Features: With Leakage Protection

Water Inlet Mode: Lower Water Inlet

Heating Method: Instant, Stainless Steel Heating Core

Power Source: Corded Electric

Plug: US Standard

Voltage:110V

Frequency: 50-60Hz

Power: 3000W

Water Pressure: 0.04-1.2MPa

Anti-Electric Shock Type: I

Waterproof Grade: IPX4

Wire Requirements: ＞2.5m²

Circuit Breaker Switch: ＞32A

Heating Time: About 5s

Interface: 1/2"NPT

Interface Outer Diameter: 20mm/0.78inch

Heating Temperature: 20-50℃/68-122℉

Power Cord Length: 1m/3.28ft

Total Height(Interfaces Included): 19.5cm/7.7inch

Water Heater Size: 11.6*7*16cm/4.6*2.8*6.3inch

Package Size: 23.5*19*10cm/9.25*7.48*3.9inch

Net Weight: 1kg/2.2lbs

Gross Weight: 1.1kg/2.4lbs

Package Included

1* Instant Water Heater

1* English Manual

Other Accessories for Assembly.

Notes

The length of the water outlet pipe of the water heater is recommended not to exceed 3m. Otherwise, the water pressure may not be enough to start the machine because the water pipe is too long. (If the water tower is used in rural areas, the height of the water tower is required to be higher than 10m to make the water pressure reach the starting value).

If the display screen shows E1(overtemperature), E3/E4, or temperature sensor failure, first cut off the power, use cold water to pass through the machine once, and then use it when powered on. Note that the water flow should not be too small at ordinary times.

Please make sure cold water flows through this water heater before your first time use.

Please check whether the power supply is normally powered on. The indicator light on the power-on display will show the temperature, but it will not light up if it is not powered on. If the temperature does not rise, you can press the temperature control switch or replace the heating pipe.

 If there is a display without heating and the display shows that the marquee lamp turns around, it means that the water flow has not passed through the water heater, the water pressure is too low, or the installation direction is wrong. Note that the water inlet and outlet should be installed correctly. However, if the water pressure is enough and the water flow does not heat, then check the water inlet turbine of the water heater. It may be that something dirty is blocking the turbine, causing the water heater to not start.

Please read the English manual carefully and completely before use. And pay attention to the safety instructions included.