p align="center">NO ELECTRICITYNO CYANIDESNO PHOSPHATESNO CAUSTIC AMINESNO AMMONIANO FUMES The only one-component, non-toxic, powdered, immersion nickel strippers on the market. Removes NICKEL from steel, copper, brass and zinc diecast, silver and gold. Caswell Inc. distributes three MetalX Nickel Strippers: MetalX B-9 strips nickel from steel, without etching the base metal. MetalX B-929 strips nickel from copper, brass, zinc diecast, pot metal, silver and gold, without etching the base metal. MetalX B-913 strips nickel from aluminum, without etching the base metal. MetalX strippers will strip nickel at the rate of 2 mils per hour, and will strip 2.5-6 ounces of nickel per gallon of stripper solution. Electroless nickel will strip at the same rate, providing the phosphorous content does not exceed 5%. Higher phosphorous electroless nickel will take longer to strip. 2.5 lbs of MetalX stripper makes 1 gallon of stripping solution. Use plastic, unlined steel or stainless steel tanks Agitation is required during stripping Stripping tank must operate between 120°F-150°F. To prolong bath life, heating should be discontinued immediately after stripping is complete. Stainless steel or titanium heaters must be used. No quartz or ceramic heaters. Instruction sheet will be provided with purchase.
