Scapa ATG Tape (TD-200): 3/4 in. x 36 yds. (Clear Adhesive on Tan Liner)

Scapa TD-200 ATG Tape, like all ATG tapes, is reverse wound on the roll so it is designed to be used in an ATG dispenser/gun. Please see below for a matrix of which sizes of this tape fit into which ATG dispensers (not for use in all ATG dispensers).

Please see listing below to confirm which ATG refill rolls work in which ATG dispensers (you can also watch a YouTube video demonstrating the compatibility between ATG refill rolls and ATG guns).

JVCC ATG1 Dispenser -or- Scotch 700 Yellow Dispenser

• JVCC ATG-7502 (acid neutral): 1/4 x 36, 3/8 x 36, 1/2 x 36, 3/4 x 36
• JVCC ATG-7502X: 1/4 x 36, 1/2 x 36, 3/4 x 36
• JVCC ATG-7505: 1/4 x 18, 1/2 x 18, 3/4 x 18
• Scapa T002 (acid neutral): 1/2 x 36, 1/2 x 60, 3/4 x 60
• Scapa TD-200: 1/2 x 36, 3/4 x 36
• Scapa TD-500: 1/2 x 18, 3/4 x 18
• Scotch 908 (acid neutral): 1/2 x 36, 3/4 x 36
• Scotch 924: 1/2 x 36
• Scotch 928 (repositionable): 1/2 x 36
• Scotch 969: 1/2 x 18, 3/4 x 18
  
  

Scotch 085 Pink Glider -or- Scotch 714 Red Dispenser -or- Scotch 700A Adapter used in Scotch 700 Yellow Dispenser

• JVCC ATG-7502 (acid neutral): 1/4 x 36 *special core
• JVCC ATG-7502X: 1/4 x 36 *special core
• Scotch 908 (acid neutral): 1/4 x 36
• Scotch 924: 1/4 x 36
• Scotch 969: 1/4 x 18

Scapa TD-200 ATG Tape, AKA Unifilm TD200, is a permanent unsupported acrylic adhesive transfer film (pressure-sensitive adhesive pre-applied to a special release liner). It is used for picture framing and photo mounting, graphic arts applications, and product assembly. Other applications include attaching fabric swatches in sample books and assembling point-of-purchase displays.

• Mounted on cores designed especially for use in tape dispensers (tape dispensing system allows for quick, clean, and easy application).
• Bonds to a wide variety of surfaces including paper, most plastic films, and metal foils.
• Very high quick-stick and excellent holding power at elevated temperatures.

The main difference between Scapa T002 and Scapa TD-200 ATG tapes is that T002 has a tackier adhesive and it is pH neutral (acid-neutral).Application Instructions

For a visual guide to loading and using refill rolls in a JVCC ATG1 dispenser please see http://static.findtape.com/inserts/ATG-Loading-Instructions.pdf.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 19mm wide. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 1 inch diameter plastic
- Backing/Carrier: N/A (Unsupported)
- Adhesive: acrylic
- Release Liner: 50# Kraft paper
- Thickness: 5.2 mils (carrier, adhesive, liner) 2 mils (carrier, adhesive) 2 mils (adhesive)
- Adhesion: 60 ounces per inch (to stainless steel test panel)
- Service/Operating Temperature: -49F to 249F