Nanoskin Formula 67 Professional Quick Detailer [NA-F67128], 1 Gallons

Nanoskin FORMULA 67 Professional Quick Detailer removes swirls, water spots, stains and light oxidation while restoring gloss and adding a durable layer of wa x protection. FORMULA 67 can be applied by hand, with a dual action polisher or a rotary polisher. Application couldn 't be easier than with Nanoskin MICROBUFF Polishing Pad and a dual action polisher. Whether you 're a novice or a pro, you 'll get expert results. If the pai nt is severely neglected, use Nanoskin NANO CUT Finishing Compound with MICROBUFF Cutting Pad prior to using FORMULA 67.

Directions:
For best results, use on clean, cool pai nt and out of direct sunlight.
Clean pad frequently using pad conditioner brush or compressed air using regulatory approved air nozzle.
Suggested Tools for Optimum Results-
FLEX XC 3401 VRG Dual Action Orbital Polisher
RUPES LHR 15ES Big Foot Random Orbital Polisher
RUPES LHR 21ES Big Foot Random Orbital Polisher
Removing 1,500 ~ 2,500 Grit Wet Sanding Marks-
1. Apply Nanoskin SPEED CUT Cutting Compound uniformly to MICROBUFF Cutting Pad.
2. Buff at 4800 opm, working a 2 ' x 2 ' section.
3. Wipe residue off using a soft, clean microfiber towel.
4. Make your own choice for finishing:
A. Apply Nanoskin FORMULA 67 Professional Quick Detailer
with MICROBUFF Polishing Pad to add a layer of wa x and
restore showroom gloss. (Speed 3800 opm)
B. Apply Nanoskin SEAL NANO Perfect Sea lant with
MICROBUFF Finishing Pad to remove gloss-hindering defects
while leaving a durable layer of pai nt protection behind. (Speed 3800 opm)
Removing 2,500 ~ 3,000 Grit Wet Sanding Marks or Finer scratches-
1. Apply Nanoskin NANO CUT Finishing Compound uniformly to MICROBUFF Cutting Pad.
2. Buff at 4800 opm, working a 2 ' x 2 ' section.
3. Wipe residue off using a soft, clean microfiber towel.
4. Make your own choice for finishing:
A. Apply Nanoskin FORMULA 67 Professional Quick Detailer
with MICROBUFF Polishing Pad to add a layer of wa x and restore showroom gloss. (Speed 3800 opm)
B. Apply Nanoskin SEAL NANO Perfect Sea lant with
MICROBUFF Finishing Pad to remove gloss-hindering defects while leaving a durable layer of pai nt protection behind. (Speed 3800 opm)

NOTE:
PAD REJUVENATION
The heavy and quick cutting of some polishers can cause the surface to become very hot and cause the o ils in the polishes/compounds to prematurely flash off.
One fine mi st of Nanoskin PAD REJUVENATOR to the center of the used pad is enough lubrication to reactivate the polishes/compounds left on the pad and get it back to a serviceable condition.
DO NOT APPLY MORE POLISHES/COMPOUNDS TO THE PAD until all excess compound is removed off the pad and the pad is completely lub ricated then apply a quarter size (1" diameter or 2.5 cm.) amount of product to center of pad.
More compound IS NOT the answer. After spr aying PAD REJUVENATOR on the pad, you will find you will be able to finish a section without any additional compounds. There was a commercial many years ago saying, "A little dab will do you" and that 's the way this system works.