1S-2S 6A Brushless Motor Drive Board Motor Speed Controller Regulator for 1104 1106 1306 Mini Model Aircraft FPV Brushless Motor

Product Description：

1S-2S 6A Brushless Motor Drive Board Motor Speed Controller Regulator for 1104 1106 1306 Mini Model Aircraft FPV Brushless Motor


Miniature mini model aircraft brushless electric modulation, nominal 1S, peak current 6A, the maximum measured voltage range supports 1-2S lithium battery, 2S must be good capacitor, electric modulation only signal input pin, without BEC 5V power supply voltage output, ordinary model aircraft receiver standard PWM signal drive, can also be driven by electric modulation tester. The electric adjustment is estimated to be suitable for small brushless motors such as 1104,1106 or 1306, and the actual use needs to be tested by yourself.

The use of electric modulation must pay attention to heat dissipation, forced blade wind cold violence measurement 2S battery 6A current heat is still ok, bad heat dissipation environment need to be measured by themselves, it is recommended to generally control the maximum load of about 3A is conservative, 1S battery LD foot connected to the negative electrode directly can light the LED, 2S battery LD foot need external current limiting resistance and then connected to the negative electrode. Otherwise, the lamp overcurrent may be easy to break, the LED lamp can not be connected to the LD foot, the test is for reference only.

There are two types of electric regulation, welded silicone wire capacitor and not welded well, according to demand, the color of the board corresponds to the color of the light, green board green, red board red.

The photoelectric weight is about 0.5 grams, and the welded wire capacitance is 2 grams.


Specifications:

voltage: 3.7V

Current: 5A

Note:

1.Due to the light and screen difference, the item's color may be slightly different from the pictures.

2.Please allow 1mm-1cm differences due to manual measurement.

Package includes:

1x Brushless Motor Drive Board