INTSUPERMAI Ultrasonic Humidifier Cool Mist Maker Cooler Sprayer 6KG/H with Water Barrel Hole

Maintenance:
1. To ensure the effect of atomization and humidification, clean the inner machine regularly, once a month. The cleaning method is as follows:
A. Open the cover, clean the atomizer with a soft cloth or a brush (the atomizer and the water level sensor switch should not be scratched, and household detergent cannot be used), clean the scale, and then rinse with water;
B. When watering, do not pour water into the circuit board, which will cause a short circuit.
C. Close the lid.
2. To ensure the normal operation of the machine for a long time, the water tank should be cleaned regularly, once a month. The cleaning method is as follows:
A. Open the water tank cover;
B. Clean the dirt on the inner wall of the water tank;
C. Close the lid.

Parameters :
1. Fog volume: ≥6kg/h
2. Humidity: 1%-99%
3. Power supply: AC110V
4. Power: 650W
5. Control method: Humidity control
6. Applicable space: 40-100m² (400-1000sq.ft)
7. Hole: 4.3inch (110mm)*1
8. Water supply quality: Purified water, tap water (softened)
9. Material: Stainless steel
10. Air volume: 160m³/h
11. N.W.: 50.7lbs
12. Dimension: 69*32*40cm (27.16"*12.6"15.75")

Note: The product does not have the bucket and accessories, the bucket is only for display, customers need to configure when using.

Item Included: 191106
INTSUPERMAI Industrial Ultrasonic Humidifier Cool Mist Maker Cooler Sprayer 6KG/H for Greenhouse