Hero image 0 of FD4616 3C3Z9N184CB For Ford 6.0L Powerstroke Diesel Fuel Filter FD-4616, 0 of 10

Reduced price

FD4616 3C3Z9N184CB For Ford 6.0L Powerstroke Diesel Fuel Filter FD-4616

(No ratings yet)

Key item features

FD4616 3C3Z9N184CB For Ford 6.0L Powerstroke Diesel Fuel Filter FD-4616
Features: Easy installation. Good direct replacement of old or damaged ones. Perfect match for the original car. High quality products, stable performance and long service life, high reliability. Function: Help block impurities and contaminants in your fuel before they can enter your engine,improve performance by ensuring a uniform fuel flow. Description: Type: Fuel Filter Service Kit Fuel Type: Diesel Fitting Type: Cartridge Part No: FD-4616 OE Part Number: FD-4616 Package: 1x Fuel Filter Kit Compatible with these models: (Compatibility is just for reference, please confirm your OE number Before Purchasing.) 6.0L Powerstroke Turbo Diesel Fuel Filter for Ford V8 engines For Ford F250 Super Duty 2003-2007 For Ford F350 Super Duty 2003-2007 For Ford F450 Super Duty 2003-2007 For Ford F550 Super Duty 2003-2007 For Ford Excursion 2003-2005 For 03-07 Ford 6.0L Powerstroke Diesel Trucks Also fits Ford LCF / Internation CityStar 4.5L Powerstroke Diesel VT275 Diesel NOT FIT 2006 E450 6.0L
The primary fuel filter install: 1. Remove the drain plug uses a 6 mm Allen wrench for the water-fuel separator and drain the fuel into a container. Allow the Horizontal Fuel Conditioning Module to drain completely,then fish out the drain plug and dispose of the fuel. 2. Remove the primary fuel filter cap with a 36 mm socket. 3. Remove the fuel filter from the cap by simply pulling it out. There is a retaining clasp on the fuel filter that snaps into the fuel filter cap.Remove and replace the o-ring from the fuel filter cap. 4. Install the new fuel filter, minding the orientation of the locking clasp and the o-ring. The o-ring side of the fuel filter is not inserted into the cap. The fuel filter should lock into the cap. Lightly coat both o-rings (cap and bottom of filter) of the new fuel filter with clean motor oil before installing into the Horizontal Fuel Conditioning Module. Torque cap to 19 lb-ft (25 N-m). 5. Reinstall the fuel-water separator drain plug. The secondary fuel filter install: 1. Remove the cap with either a 24 mm socket or 1/2 inch square drive. 2. Remove and discard the used fuel filter. 3. Drain the fuel filter housing of any fuel. Install the new fuel filter into the fuel filter housing. 4. Remove and replace the o-ring on the fuel filter cap. Lightly coat the o-ring with clean motor oil, then reinstall the cap. Torque to 10 lb-ft (14 N-m); do not overtighten the cap. 5. Turn the key into the ""run"" position (as you would to initiate the glow plug sequence) for 30 seconds, then back to the ""off"" position. Repeat this procedure a minimum of 3 times in order to prime the fuel system before starting.fd4616
Note: --Please BE AWARE that the vehicle compatibility list on walmart may not be 100% accurate. Please Comfirm The Parts Number And Confirm This Item Fits Yours Before Purchasing. --Above listed items are a main reference, for detailed model, please use the year/make/model check finder and check the replace part numbers to confirm the compatibility before purchasing. --If you have any issues with our product, please contact us immediately and we will do our best to resolve your issue.

Specs

Vehicle make
Ford
Vehicle model
F250 Super Duty
Vehicle year
2003, 2004, 2005, 2006, 2007
Brand
MR-Auto-SPAR
Vehicle fitment type
Universal
Vehicle type
Truck

Current price is Now $14.66

You save $2.00

was $16.66

Price when purchased online

Free 90-day returns

How do you want your item?

I want delivery savings with

Try 30 days of Free Shipping with Walmart+! Choose plan at checkout.

How do you want your item?

Columbus, 43215

Arrives by Tomorrow

Order within 4 hr 50 min

Sold by Meng mall

Fulfilled by Walmart

4.444444444444445 stars out of 5, based on 27 seller reviews(4.4)

Report an issue with this seller

Free 90-day returns - in store or online

Get free delivery, shipping and more*

*Restrictions apply

About this item

Product details

Features:

Easy installation.

Good direct replacement of old or damaged ones.

Perfect match for the original car.

High quality products, stable performance and long service life, high reliability.

Function: Help block impurities and contaminants in your fuel before they can enter your engine,improve performance by ensuring a uniform fuel flow.

Description:

Type: Fuel Filter Service Kit

Fuel Type: Diesel

Fitting Type: Cartridge

Part No: FD-4616

OE Part Number:

FD-4616

Package:

1x Fuel Filter Kit

Compatible with these models:

(Compatibility is just for reference, please confirm your OE number Before Purchasing.)

6.0L Powerstroke Turbo Diesel Fuel Filter for Ford V8 engines

For Ford F250 Super Duty 2003-2007

For Ford F350 Super Duty 2003-2007

For Ford F450 Super Duty 2003-2007

For Ford F550 Super Duty 2003-2007

For Ford Excursion 2003-2005

For 03-07 Ford 6.0L Powerstroke Diesel Trucks

Also fits Ford LCF / Internation CityStar 4.5L Powerstroke Diesel VT275 Diesel

NOT FIT 2006 E450 6.0L

The primary fuel filter install:

1. Remove the drain plug uses a 6 mm Allen wrench for the water-fuel separator and drain the fuel into a container.

Allow the Horizontal Fuel Conditioning Module to drain completely,then fish out the drain plug and dispose of the fuel.

2. Remove the primary fuel filter cap with a 36 mm socket.

3. Remove the fuel filter from the cap by simply pulling it out. There is a retaining clasp on the fuel filter that

snaps into the fuel filter cap.Remove and replace the o-ring from the fuel filter cap.

4. Install the new fuel filter, minding the orientation of the locking clasp and the o-ring.

The o-ring side of the fuel filter is not inserted into the cap. The fuel filter should lock into the cap.

Lightly coat both o-rings (cap and bottom of filter) of the new fuel filter with clean motor oil before installing into the

Horizontal Fuel Conditioning Module. Torque cap to 19 lb-ft (25 N-m).

5. Reinstall the fuel-water separator drain plug.

The secondary fuel filter install:

1. Remove the cap with either a 24 mm socket or 1/2 inch square drive.

2. Remove and discard the used fuel filter.

3. Drain the fuel filter housing of any fuel. Install the new fuel filter into the fuel filter housing.

4. Remove and replace the o-ring on the fuel filter cap. Lightly coat the o-ring with clean motor oil, then reinstall the cap. Torque to 10 lb-ft (14 N-m); do not overtighten the cap.

5. Turn the key into the "run" position (as you would to initiate the glow plug sequence) for 30 seconds, then back to the "off" position.

Repeat this procedure a minimum of 3 times in order to prime the fuel system before starting.

Note:

--Please BE AWARE that the vehicle compatibility list on walmart may not be 100% accurate. Please Comfirm The Parts Number And Confirm This Item Fits Yours Before Purchasing.

--Above listed items are a main reference, for detailed model, please use the year/make/model check finder and check the replace part numbers to confirm the compatibility before purchasing.

--If you have any issues with our product, please contact us immediately and we will do our best to resolve your issue.

FD4616 3C3Z9N184CB For Ford 6.0L Powerstroke Diesel Fuel Filter FD-4616
Features: Easy installation. Good direct replacement of old or damaged ones. Perfect match for the original car. High quality products, stable performance and long service life, high reliability. Function: Help block impurities and contaminants in your fuel before they can enter your engine,improve performance by ensuring a uniform fuel flow. Description: Type: Fuel Filter Service Kit Fuel Type: Diesel Fitting Type: Cartridge Part No: FD-4616 OE Part Number: FD-4616 Package: 1x Fuel Filter Kit Compatible with these models: (Compatibility is just for reference, please confirm your OE number Before Purchasing.) 6.0L Powerstroke Turbo Diesel Fuel Filter for Ford V8 engines For Ford F250 Super Duty 2003-2007 For Ford F350 Super Duty 2003-2007 For Ford F450 Super Duty 2003-2007 For Ford F550 Super Duty 2003-2007 For Ford Excursion 2003-2005 For 03-07 Ford 6.0L Powerstroke Diesel Trucks Also fits Ford LCF / Internation CityStar 4.5L Powerstroke Diesel VT275 Diesel NOT FIT 2006 E450 6.0L
The primary fuel filter install: 1. Remove the drain plug uses a 6 mm Allen wrench for the water-fuel separator and drain the fuel into a container. Allow the Horizontal Fuel Conditioning Module to drain completely,then fish out the drain plug and dispose of the fuel. 2. Remove the primary fuel filter cap with a 36 mm socket. 3. Remove the fuel filter from the cap by simply pulling it out. There is a retaining clasp on the fuel filter that snaps into the fuel filter cap.Remove and replace the o-ring from the fuel filter cap. 4. Install the new fuel filter, minding the orientation of the locking clasp and the o-ring. The o-ring side of the fuel filter is not inserted into the cap. The fuel filter should lock into the cap. Lightly coat both o-rings (cap and bottom of filter) of the new fuel filter with clean motor oil before installing into the Horizontal Fuel Conditioning Module. Torque cap to 19 lb-ft (25 N-m). 5. Reinstall the fuel-water separator drain plug. The secondary fuel filter install: 1. Remove the cap with either a 24 mm socket or 1/2 inch square drive. 2. Remove and discard the used fuel filter. 3. Drain the fuel filter housing of any fuel. Install the new fuel filter into the fuel filter housing. 4. Remove and replace the o-ring on the fuel filter cap. Lightly coat the o-ring with clean motor oil, then reinstall the cap. Torque to 10 lb-ft (14 N-m); do not overtighten the cap. 5. Turn the key into the ""run"" position (as you would to initiate the glow plug sequence) for 30 seconds, then back to the ""off"" position. Repeat this procedure a minimum of 3 times in order to prime the fuel system before starting.fd4616
Note: --Please BE AWARE that the vehicle compatibility list on walmart may not be 100% accurate. Please Comfirm The Parts Number And Confirm This Item Fits Yours Before Purchasing. --Above listed items are a main reference, for detailed model, please use the year/make/model check finder and check the replace part numbers to confirm the compatibility before purchasing. --If you have any issues with our product, please contact us immediately and we will do our best to resolve your issue.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Compatible cars

Ford F250 Super Duty 2003-2007

Vehicle make

Ford

Vehicle model

F250 Super Duty

Vehicle year

2003, 2004, 2005, 2006, 2007

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.