Features:
*1. GPS HUD is compatible with all vehicles, cars, EVs, trucks, hybrid, and more with USB interface.
*2. It has complete functions and can display: speed, time, trip time, trip distance, acceleration time of 0-100km, altitude, longitude, latitude, driving direction (angle), with speed alarm and fatigue driving reminder.
*3. 5.5inch large screen with 16:9 aspect ratio, LED display, you can read the key data easily.
*4. GPS chip adopts 10 Hz high refresh rate without delay.
Material: PC+ABS
Features: Speed Time Single driving time Single mileage Acceleration time per 100 kilometers Altitude Longitude Latitude Driving direction (angle)
Speed alarm Fatigue driving reminder
Screen size: 5.5inch
Product size: 127.7x64.7mm
Box size: 16.5*7.5*6cm
Weight of the whole set: 200g
Packing list:
1X host
1XUSB cable
1X double-sided tape
1X Suction Cup Holder
WORKS FOR ALL VEHICLES – Unlike other car head-up displays, this HUD is GPS+BeiDou dual-mode chip, so you don't need to worry about compatibility issues and latency problems. This HUD is compatible with all vehicles around the world, with fast speed refresh and no latency.
PLUG AND PLAY - The Vehicle Smart HUD Display features a hassle free plug and play operation. Simply mount the unit near the dashboard. It is powered via the included cigarette lighter USB cable. Automatic synchronization of power on and off according to engine ignition.
Frequently asked questions:
1.The screen without any display, and no power
Check whether the USB cable is damaged, replace the USB cable for testing, and prohibit the use of voltage higher than 5V for power supply
2.Speed is not correct
(1) If the unit is correct,km KM/mile MPH, (speed unit switch reference settings item)
(2) The car factory had increased speed(5-7%)than real for drivers’ safety,satellite data is strictly follow the international standards
(3)The speed adjustment steps are as follows:
After the GPS speedometer is displayed normally, press and hold the scroll wheel button vertically for 3 seconds to enter item 1 (1-9), then toggle the scroll wheel button left and right to adjust the speed (default is 107. Then your car speed is 30MPH, and the speed of GPS speedometer is 35MPH, then you need to toggle the scroll wheel button to the left to adjust "107" to "102". On the contrary, if your car speed is 33MPH and GPS speed is 30MPH, you need to toggle the wheel button to the right to adjust "107" to "110"), and finally press and hold the wheel button vertically for 3 seconds to save.
3.Driving direction display error
After the vehicle speed exceeds 5KM / H, the direction can be displayed normally.
4. Switching of unit KM/H and MPH
After the GPS speedometer is displayed normally, press and hold the wheel button vertically for 3 seconds to enter item 1 (1-9), then press the wheel button vertically to switch to item 7, then toggle the wheel button left or right to adjust to the desired unit ("1" is MPH, "0" is KM/H), and finally press and hold the wheel button vertically for 3 seconds to save.
5. Brightness adjustment
The brightness can also be adjusted, step by step as follows:
After the machine is turned on and displayed normally, press and hold the scroll wheel button vertically for 3 seconds to enter item 1 (1-9), then press the scroll wheel button vertically to switch to item 6 (0-11. 0=automatic sensitivity adjustment, 1-11=manual adjustment), then adjust the brightness to the left or right according to your needs. Finally, press and hold the scroll wheel button vertically for 3 seconds to save.
