QUAYUB H9 H11 Combo LED Headlight High&Low+Fog Light Bulbs Kit Super Bright White For Saturn Sky 2007-2010

Specification:
Plug Type: H11(H9)+H11(H8)+H11(H8),H11=H9=H8,High low Beam +Fog Light
Power(per set): 120w/Pair
LED Quantity(each bulb): 4side LED chips
Luminous Flux: 20000lm
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
Waterproof rate: IP68 rated water and dust seal
Lifespan: Over 50000hrs lifetime
Beam Angle: 360 degree@low beam,360 degree@high beam
Material: Aviation 6063 aluminum profile
Operating Temperature: -20-80 degree Celsius
Usage: headlight+fog light
H9 H11 H11 LED Hi-Lo Beam +fog Light LED headlight + Fog Light conversion kit
Latest LED chip light source,2 luminous faces no blind zone
300% brighter than original halogen bulbs
Soft White light in solid beam pattern, will not dazzle on-coming traffic.
Xenon white light reflect road paint/signs better to show clearer road situation during night driving
360 degree low beam angle with cut-off line,will not dazzle oncoming traffic
All-in one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
Built-in constant current CPU, instant full brightness without start-up relay
600% BRIGHTER THAN HALOGENS: The H9 H11 H11 led headlight + Fog Light provide up to 600% more light with a 6000K cool white clearer color. This is 6 times brighter than your original halogen bulb.
PERFECT BEAM PATTERN: The ultra thin design makes the chips of our H9 H11 H11 led bulb much closer for a Super-Focused beam, delivering wider angle and farther range light on the road. No glare to oncoming traffic, and no dark spots ensure a safer drive.
Easy To Install Almost 1:1 mini design as halogen, easy to install in 10 minutes without any modification.
Two-way heat dissipation channel

Package Included:
2x H9 LED Headlight High Beam Bulbs
2x H11 LED Headlight Low Beam Bulbs
2x H11 Fog Light Bulbs
New and old packaging will be shipped randomly

Install Caution:
As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
Put the vehicle into park or make sure it is securely in gear.
Make sure to have the ignition turned off and the keys removed.
Be careful to avoid burns, especially when turning on or off the vehicles lighting.
Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Please install car headlight dust cover to ensure the normal operation of the lamp (to prevent dust and small ribbons to reduce the chances of bulb cooling fan broken to ensure the normal operation of the cooling system)