KnuKonceptz Kolossus Flex 0 Gauge OFC Dual Power Amp Installation Wiring Kit

Kolossus Fleks 0 Gauge Dual Amp Power Installation Kit. This kit was designed to simplify a dual amplifier installation by including all parts required to power a high current, two amplifier system.

KnuKonceptz Kolossus amp installation kit's feature our top of the line Kolossus Fleks power and ground cables. Made up of ultra flexible pvc and ultra fine tinned strands of oxygen free copper (OFC), the Kolossus Kable is the standard for which all others are compared to. The KFX-PK20 amp power kit provides 18 feet of blue power wire and 2 feet of translucent black (smoke) ground wire. The KnuKonceptz FH-20 fuse holder comes with a 300A fuse. The fuse holder does not come installed within the cable, this allows the installer to place the inline fuse holder in an optimum location during installation. It also allows the installer to extend the power wire 1-3' by using the inline fuse holder to add cable to the main run (leaving the 18' as one unit and using the FH-20 to splice a few extra feet of wire should your installation require a longer run)

Additional Speaker Wire and RCA's will be required to complete your installation. Please note the installation guide (PDF) available for download when installing this product.

Included with this dual amp power kit is:

- 18 Feet 0 Gauge Blue Kolossus Fleks Power Wire
- 2 Feet 0 Gauge Smoke Kolossus Fleks Ground Wire
- One FH-20 In line fuse holder with 300A Fuse
- 2 Black / 1 Red 0 Gauge ring terminals
- 1 KNF-12 Two way Fuse Block with 150A fuses
- 6 Feet of 4 Gauge Blue Power Wire
- 8 Feet of 4 Gauge Smoke Ground Wire
- 2 Black 4 Gauge ring terminals
- 5 feet Split Loom and wire ties