1000lbs Motorcycle Scooter Carrier Tow Receiver Trailer Hauler Hitch Mount Rack

As far as Value goes the carrier was priced in the middle of the options that I had come across. Assembly was pretty straightforward, but I did have to drill a hole for the handle. From appearances upon first look after being assembled, the carrier looked like it was going to do the job . The materials appeared sturdy and Construction seemed adequate.. Hooking the bike up did present a few issues . Because of my hitch height, I had to buy an adapter to lower the it became very evident that some type of lubrication was needed in order to fully wind the handle while raising the bike into the stove position. hitch height. It became very evident that some type of lubrication was needed in order to fully wind the handle while raising the bike into the stow position. Once the bike was in a full up and lock position, I fully screwed the bike per the manufacturers recommendation showed in the pictures provided in the manual.. after a few tug and pulls pushes and shoves to test the integrity of the securement, I felt comfortable enough to initiate my journey. Within 30 feet I made a left turn out of the drive way and the carrier broke and dropped the bike on its right side, causing roughly $6000 in damage. In conclusion, I would not recommend this product. I believe this product listing is highly misrepresented as being able to carry its advertised load.