• Humidity Sensor
  
• Solid Sockets
  
• Reliable Plug
  
• Package Content
  

Humidity Sensor

Humidity Measure Range: 5%-99.99%RH

Humidity Control Range : 5%-99%RH

Accuracy: ±3%RH

Resolution: 1%RH

Sensor Length：6.56ft (2m)

Solid Sockets

Power Output: Max. 10A, 100V ~240V AC

Work 1:To control humidifier

Work 2:To control dehumidifier

Socket: 3.3x1.7x1inch (85x42x24mm)

Reliable Plug

US Standard

Power Consumption：<3W

Input Power Cable Length： 5ft (1.5m )

Output Power Cable Length：1ft (30cm)

Package Content

A nice packaging for a gift choice

Package included:

1x IHC-200-WiFi humidity controller

1 x User manual

Wi-Fi Humidity Controller IHC-200

Notes:
- Do not put probes or metal wire into the fire.
- Do not put probes into the water, it may lead to inaccurate measurements.
- Only support 2.4GHz Wi-Fi (Support IEEE 802.11b/g/n).

Multi-scenario Application

How to connect the IHC-200 WiFi with APP (INKBIRD)?

• Dual Display Windows】:
  Display the set humidity value and the measured humidity value at the same time with 2 screens.
  
• Dual Relay Output】:
  Support both humidifying equipment and dehumidifying equipment.
  
• Humidity Calibration】:
  Support humidity calibration and dehumidification control delay protection.
  
• Remote Control】:
  Connect the IHC-200 Wi-Fi humidity controller to 2.4GHz Wi-Fi, and monitor or adjust the humidity on your phone through the app at any time anywhere.
  
• High/Low Humidity Alarm】:
  Set a High/Low Humidity Alarm, which alarms and reminds you if the humidity value exceeds the setting value, and alarms when a probe error occurs.
  
• Alarm Stop】:
  Press any button to turn off the alarm sound or you can turn it off on your phone.
  

• Support humidity calibration and dehumidification control delay protection.
  
• Maximum Power: 1200W(120Vac)
  

For Example:
You would like to set the range for 47% to 55%

• Set "HS" (Target Humidity) as 50.
  
• Set "HD" (Humidification Differential Value) as 3.
  
• Set "DD" (Dehumidification Differential Value) as 5.
  

Set "HS" (Target Humidity) as 50.

Set "HD" (Humidification Differential Value) as 3.

Set "DD" (Dehumidification Differential Value) as 5.

On Oct 12, 2023 at 03:23:50 PDT, seller added the following information: