Using to paint my boat. Great product [This review was collected as part of a promotion.]
About This Item
- For indoor/outdoor use as base coat on aged, cracked, pitted, rough or previously painted fiberglass and wood surfaces.
- Durable primer formulated to resist corrosion
- Dries to the touch in 1 hour, can be recoated after 4 hours and fully cured after 72 hours.
- Covers up to 100 sq. ft.
- Dries to a smooth, hard, protective finish
- Do not apply below the waterline
WARNING: Cancer and Reproductive Harm ? www.P65Warnings.ca.gov www.p65warnings.ca.gov
|Global Product Type|
|Price Per Unit UOM|
|Working Load Limit|
0 Kilograms Per Meter
5 x 5 x 5 inches; 3.5 pounds
|Number of Customer Ratings|
|PPU Quantity of Units|
Rust-Oleum Marine Coatings Wood & Fiberglass Primer, Quart
|Units Per Consumer Unit|
coverage: 100 sq. ft./gal., dry time (hours): 24, size: 1 qt., sub-category: primers, dry time recoat (hours): 24, dry time tack free: 4 to 7 hr., surface: fiberglass, wood, dry time: 24 hr., color: white, finish: flat, item: primer, application temperature (f): 50-90 degrees, coverage (square-ft.): 100, dry time recoat: 4 to 7 hr., exposure conditions: exterior, application method: brush, roll, spray, application temperature: 50 to 90 degrees f
|Assembled Product Weight|
|Assembled Product Dimensions (L x W x H)|
4.25 x 4.25 x 4.75 Inches
Would purchase again
Good primer. Covers well [This review was collected as part of a promotion.]
worked great. I did not have luck with roll and tip method as it left lots of streaks and did not even out. it was very hot. Foam roller also sucked. This very well could have been our technique and the hot noon sun. Had best results with very low nap 4" little "hotdog"roller. [This review was collected as part of a promotion.]
It was separated paint on the bottom oil on top. the paint was so hard it didn't want to stir so I spilled some of the oil when mixing.
Get specific details about this product from customers who own it.
Ask a question