Similar items in stock
- Clearance$129.00 List price $179.99Save $50.99
- $17.42 Was $19.97Save $2.55
- Rollback$149.00 Was $169.00Save $20.00
- $45.07 Was $50.48Save $5.41
Summer Escapes 10' x 30" Quick Set Swimming Pool
Check out these related products
- Reduced Price$829.58 List price $1512.00Save $682.42
- Reduced Price$1,152.47 List price $2064.00Save $911.53
- $402.07 Was $407.60Save $5.53
About this item
About this item
Have fun and stay cool this summer with the Summer Escapes Round 10' x 2'6" Quick Set Swimming Pool. This quick set pool will set up completely in 15 minutes. Four people can easily fit in this inflatable swimming pool. It is suitable to use in the backyard for summer fun, so you won't have to travel to enjoy cooling off on hot summer days. The filter cartridge helps keep your pool clean. The round 10' x 2'6" quick set swimming pool is available in multiple sizes to fit nearly any family's needs, offering hours of summertime fun and excitement. Kids will enjoy playing in the cool water while adults will enjoy spending a lazy afternoon floating around the pool.
Summer Escapes Round 10' x 2'6" Inflatable Quick-Set Swimming Pool:
Features & Specifications:
- Ideal for up to 4 people
- PVC, polypropylene and polyethylene construction
- RP 600 pump with GFCI
- Filter cartridge
- 10' diameter x 2'6"H
- 12' diameter x 2'6"H
- 15' diameter x 3'H
- Requires 1-2 people for assembly
- Takes approximately 15 minutes to assemble
- Pool must be assembled on solid, level ground
|Is Assembly Required:||Y|
|Manufacturer Part Number:||M-P21-1030-A|
|Assembled Product Dimensions (L x W x H):||120.00 x 120.00 x 30.00 Inches|
Manuals & Guides
Ask a question
- Kathy, put the plugs on the hose ends inside the pool before you unscrew the pump to change the filter. They give the caps with the pool in the box and you put them on under the water line inside the pool to block the water before you take the filter apart.by Kellilynne9/2/2013Was this answer helpful? (0) (0)Was this answer helpful?
- You should have received 2 other pieces to plug the holes on the inner side of the pool that the filter hoses join to. This allows you to turn off pump for cleaning purposes and if you just don't want to use a pump which I do not advise. The larger clear cover twist right over one hole and the small black top hat looking one you have to untwist the small curved tube (inside of pool, you will have 2 pieces once you do this) you will now place black top hat into hole and twist back on the ring from the 2 pieces you just took off. Now you can turn of pool and change filter with no gushing water. Hope that helps.by tlong9/1/2013Was this answer helpful? (0) (0)Was this answer helpful?
- The pool came with a cap to screw on the inside of the area where the water goes through the filter and a plug for the other section where the water comes back in the pool from the filter. If you plug these two areas, you can unscrew the filter and change it out. You don't have to have the vaseline...I never use it and never have a problem with it. I did have the gushing due to I forgot to plug my holes. Now I have not problems with it. The filter needs to be changed weekly to help maintain the life of the filter system. Anyway best of luck to you.by Idapearl7/23/2013Was this answer helpful? (1) (0)Was this answer helpful?
- In your pool kit a black "cap-shaped" plug and a clear screw on cap is also in there. Unscrew the intake ring, and replace it with the black cap. Then on the output side simply screw on transparent cover over output screen. All this is done inside the pool. This will stop all the water flowing to the pump. It is important to remember after you change your filter to put everything back to the way it was or your pump will be running with no water circulating and that is never good. Hope that helps out. p.s. I did the same thing,lol, don't feel bad. If you cant find those items all you need to do is plug the holes from the inside the pool.by taterchips7/23/2013Was this answer helpful? (1) (0)Was this answer helpful?
- Try to read the instructions one more time to see if they are more clear. This is what I do: 1. Unplug the pump. 2. On the left side of the pump, the hose connected to the pool, on the other side of that connection, on the inside of the pool, unscrew the round part that holds the diverter on. You will then have just the hole that leads to the hose in that spot. There is a black plastic plug that looks like a miniature top hat. That piece gets plugged into that hole for now. That will keep water from going into the hose and into the pump you are trying to open to change the filter. 3. On the right side of the pump, there is another hose connected to the pool. Nothing gets taken off here. There is something that gets put on instead. You should have a clear plastic piece that is a dome shape that gets screwed on to the inside of the pool, on the other side of where this hose is connected. That also keeps the water from going into the hose and into the pump you are trying to open to change the filter. 4. Now you can open the top of the pump, change the filter cartridge, re-lubricate the ring and close it back up without water coming out all over the place. 5. After closing up the pump, you then take the dome shaped plastic piece off the right side hose on the inside of the pool. 6. Then on the left side hose, remove the black plug and replace the diverter and round screw-on piece that holds it in place. 7. Make sure everything is closed tightly, plug the pump back in, and press the reset button and you should be ready to go.by bbigs6/30/2013Was this answer helpful? (2) (0)Was this answer helpful?
- Put the White cap in the inside of the pool on to work on filter. If you have not taken it off your water is not filtering thru the pool. Remove the cap after servicing filter.by KCinthewater6/17/2013Was this answer helpful? (1) (0)Was this answer helpful?
- Pluck both of the holes in the pool where the filter hoses go in...simply unplug them when done changing the filter.by Chrissykissy126/30/2013Was this answer helpful? (2) (0)Was this answer helpful?
- If you will screw the cap back on the intake to the filter inside the pool looks like a tiny clear bowl, then put the black plug into the output, this will stop the flow of water to the pump out from the pool. Turn the pump off, the tighten the air valve and unscrew the large outer ring. Then replace the filter. I had the same yuck experience with the gross filter and getting dirty fast alsoby mbmrs6/17/2013Was this answer helpful? (1) (0)Was this answer helpful?
- When you got the pool it came with a clear plastic cap over the filter intake circle that goes in the pool and a black plastic piece for the output section. The instructions said these were for servicing the filter, i.e. changing out the filter. If you put those pieces on the two ends, water will not be flowing through and will not keep gushing out.by LegalLadyBug6/16/2013Was this answer helpful? (1) (0)Was this answer helpful?
- The black plug goes in the output end. Mine was smashed when I got it, so it doesn't want to stay in there unless there is pressure, so I unscrew the cap a little and then push the plug in. The water pressure holds it there. Are you also screwing the cap over the intake end? That white lid that was screwed onto the grill looking part of the pump? If you have that screwed on and the black plug in the other hole, you should only have a short gush when you first unscrew the cap on the pump.by Gmomoj6/15/2013Was this answer helpful? (1) (0)Was this answer helpful?
Q. why is my filter leaking after its all put together.seems to leak more if the filter is not running
- Mine leaked a little. It only seem to do this after I changed the filter and eventually would stop.by tlong9/1/2013Was this answer helpful? (0) (0)Was this answer helpful?
- You have to unscrew it and make sure the black rubber gasket is on correctly sitting down in the groove. I had the same problem, once I reset it and tightened it back I have no more leaks.by Idapearl7/21/2013Was this answer helpful? (0) (0)Was this answer helpful?
- Vaseline is suggested by manufacture on the seals, mine leaked also until I used this.by taterchips6/27/2016Was this answer helpful? (0) (1)Was this answer helpful?
- No, it shouldn't leak at all. Raise the filter to above water level, and then take the top off and check the insides - the black rubber rings should be be in place, in both caps on the filter (the big cap and then the smaller cap on the very top).by CEGIII7/8/2013Was this answer helpful? (0) (0)Was this answer helpful?
- When your pump is running you need to release the valve on top of the filter, when it is not running, it should be shut.by Lissamel847/4/2013Was this answer helpful? (0) (0)Was this answer helpful?
- return it to the store if still possible. You;ll never get this company to fix it.by cat5555557/3/2013Was this answer helpful? (0) (0)Was this answer helpful?
- There are two black valve rings that have to be in groove just right or the pump leaks. My husband gently squeezes the hoses to hold back the water while I fit the rings and secure the top after changing the filter.by NHBPF7/1/2013Was this answer helpful? (0) (0)Was this answer helpful?
- Ours leaks a small amount too. My Hubs, a plumber, says it's normal.by ThePinkBurrito6/29/2013Was this answer helpful? (0) (0)Was this answer helpful?
- Be sure you have liberally lubricated all the gaskets (black O rings) and that will make the seal better. Hope this helps.by bbigs6/28/2013Was this answer helpful? (0) (0)Was this answer helpful?
- Put a little Vaseline around the black rings...then put it back on. It's possible one of the black rings simply isn't sitting in their straight. Try not to put the caps on to tight...you shouldn't need to and the directions say "dont over tighten" we have a small drip coming from our hose that is hooked i to the pool. No biggie really..it's just a drip. I also had my pump leaking from the top...my cover just wasn't on tight enough. Anyways...no it's not supposed to leak. My bet is you just need some Vaseline and try it again.by Chris10056/25/2013Was this answer helpful? (0) (0)Was this answer helpful?
- Yes it comes with the pool but it's way undersized - doesn't circulate the water well enough, but it's there - get extra filter cartridges too - type D is the size and they need changed once a week or so. They're not expensive.by Kellilynne9/2/2013Was this answer helpful? (0) (0)Was this answer helpful?
- Yes one filter came with it. However you will need to buy more. I change mine about every other week.by tlong9/1/2013Was this answer helpful? (0) (0)Was this answer helpful?
- No. You have to purchase the filters.by Idapearl7/21/2013Was this answer helpful? (0) (0)Was this answer helpful?
- Yes, as does the pump, no chlorine tablets. Manufacturer suggests changing every 2 weeks. It is a Type D Filter and is sold two in a package.by taterchips7/16/2013Was this answer helpful? (0) (0)Was this answer helpful?
- Yes!by CEGIII7/8/2013Was this answer helpful? (0) (0)Was this answer helpful?
- no filter. there is an electric pump that you should run about half the time at least.by colguin7/8/2013Was this answer helpful? (0) (0)Was this answer helpful?
- Yesby Jennipher307/8/2013Was this answer helpful? (0) (0)Was this answer helpful?
- Yesby Busman5237/7/2013Was this answer helpful? (0) (0)Was this answer helpful?
- yes it includes 1 size D filter.by AustinRob7/5/2013Was this answer helpful? (0) (0)Was this answer helpful?
- Yes! This pool comes with the pump and its corresponding filter.by Lissamel847/5/2013Was this answer helpful? (1) (0)Was this answer helpful?
Customers also bought these products
- $14.11 List price $22.28Save $8.17