PTC Creo workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) - Dedicated video cards supporting DirectX 11 or later are strongly recommended. This workstation is certified to work with PTC Creo.
Processor: Dual Intel Xeon E5-2637v2 Quad Core 3.5Ghz Processors 8 Cores, 16 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available)
Memory: 32GB DDR3-1866 Memory. Supports up to 128GB of total memory, Quad channel up to 1866MHz ECC RDIMM memory; 8 DIMM slots (4 per processor). (actual memory speed dependent on the processor capability)
PCIe Solid State Drive: 1TB M.2 SATA SSD with PCIe Adapter Card
Storage: 2TB 7.2K PC SATA Drive
Drive Bays: Up to three 3.5" or four 2.5" internal SATA, SAS or SSD drives. Additional add-in controller required for SAS hard drives.
Raid Controller: Intel AHCI 6Gb/s SATA controller with six ports (two6Gb/s, two 3Gb/s, two reserved for optical drives)supports software RAID 0, 1, 5, 10
Graphics: Nvidia Quadro K4000 3GB GDDR5 Graphic Card, DirectX 11.2 (Certified Hardware for PTC Creo)
Operating System: Windows 10 Professional 64-Bit Pre-Installed
Software: PTC Creo Software is not included
Power Supply: 825W Power Supply
Optical: DVDRW Drive
Networking Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support.
Slots: Two PCIe x16 Gen 3; two additional PCIe x16 Gen 3 (requires second processor option); one PCIe x16 Gen 3 wired x4; one PCIe x16 Gen 2 wired x4; One PCI 32bit/33MHz.
Front Ports: 3 - USB 2.0, 1 - USB 3.0, 1 - Microphone, 1 - Headphone.
Rear Ports: 3 - USB 2.0, 3 - USB 3.0, 2 - PS2, 1 - Serial, 2 - RJ45.
Internal Ports: 3 - USB 2.0, 8 - SATA/SAS 6Gb/s, 2 - SATA 6Gb/s (for optical drives).
Peripherals: Power Cable Included. Mouse, Keyboard, and Video Cable Not Included.
Condition: Seller refurbished unit may have minor scratches and scuffs
*Systems are built to order and fully customizable. Please call for more information. Note that a stock photo is used and unit may differ depending on configuration.
- Ideal for PTC Creo
- 2x 3.5Ghz Quad Core E5-2637v2 CPUs, 16 Threads
- 32GB of DDR3-1866 RAM
- 1TB M.2 SATA SSD with PCIe Adapter Card and 2TB 7.2K PC SATA Hard Drive
- Nvidia Quadro K4000 3GB GDDR5 Graphic Card