We aim to show you accurate product information. Manufacturers,
suppliers and others provide what you see here,
and we have not verified it.
Give your project a pearl like shine with Plasti Dip Pearlizer. This compact solution allows you to capture a crisp and professional look on a modest DIY budget. Use the simple aerosol spray can design to carefully cover your project, applying 3 to 4 coats, or as desired. The gleaming pearl finish will transform the look of your project, and is suitable for use on equipment related to power sport, home & garden, hobby & craft, auto, RV, and marine.
Create a pearl finish without the help of professionals
Use for a variety of projects including power sports, home & garden, hobby & craft, auto, RV, and marine
Easy to use aerosol bottle
For best results, apply Pearlizer over Plasti Dip
Apply 3–4 coats, or until desired effect is reached
Net weight 11 oz. (311g)
proposition 65 reasons:Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Instructions: Tech Tips: Always protect surrounding areas from overspray. Allow 4 hours per coat for complete dry. If runs or sags are experienced, move farther away from surface. To avoid clogged nozzle, turn can upside down and spray for 5 seconds. If clogged, remove nozzle and soak naphtha or mineral spirits for 30 minutes. Do not stick pin or other objects into stem. Use naphtha, xylene (xylol), or toluene(toluol) for clean-up. To greatly increase non-skid properties, sprinkle a generous amount of grit onto wet surface of first coat. Apply at least two additional coats of Plasti Dip®. For best results, use a pumice (crystalline silica) grit. Results may vary with other grit additives. When applied properly Plasti Dip® can be removed from most surfaces, if desired. Surface must be clean and dry. For best results, apply Pearlizer™ over Plasti Dip®. Avoid direct sunlight, high humidity or breezy conditions. 1. Shake can vigorously for one full minute after mixing ball begins to rattle. Shake often while applying. 2. Hold can 6"–10" (15 to 25cm) from surface, moving can back and forth slightly overlapping each stroke. Apply heavy enough to produce an even, wet appearance. 3. Allow 30 minutes minimum between coats. Apply as many coats as desired. (3–4 average). 4. Allow 4 hours minimum dry time before use. Coverage: Approximately 5–10 sq. ft. (.5–.9 square meters) per can. Test in inconspicuous area.
Packaging requirements for returns
Due to federal restrictions, this item must be returned in its original package, or with secure ORM-D packaging obtained from the post office. We advise keeping the original packaging for at least 90 days. See our returns policy for more information.
Manufacturer Part Number
Assembled Product Dimensions (L x W x H)
8.50 x 5.75 x 8.25 Inches
Be the first to review this item!
Questions & Answers1 question
Get specific details about this product from customers who own it.
Policies & Plans
See any care plans, options and policies that may be associated with this product.
I have feedback on
Due to the high volume of feedback, we are unable to respond to individual comments. If you need immediate assistance, please contact Customer Care.
How was your experience with this page?
Sorry, but we can't respond to individual comments. If you need immediate assistance, please contact Customer Care.
Your feedback helps us make Walmart shopping better for millions of customers.