It's hard to beat this with a stick as the cost is so low. It's not as speedy as some tablets, but for most tasks it is just fine. I ordered three for the holidays. One HUGE annoyance is that out of the box there is a problem with the sensor. Tilting the device does not give you the auto rotate behavior one desires. Two out of Three of these I bought did not tilt correctly, making them useless in auto rotate mode. Looking at the gsensor calibration tool showed that the X and Y values of the sensor were way off, (supposed to be zero.) Supposedly you can lay the device on a flat table, hit the calibrate button and set the values to zero to fix the problem. NOT. The device spits this message at you. "Have you kept the device in a horizontal desktop? If so there must be something wrong with Gsensor." Finally after much trial an error I managed to find a method that worked on those two tablets. You have to tilt the device until the X and Y values are near zero, then hit the calibrate button. Slowly keep tilting the device until it is flat on you desk or tablet pressing calibrate every few moments until you get it flat and X=Y=0. On the third tablet, it's X and Y values were near zero, thus it auto rotated fine. However they are not zero and yet no amount of fiddling with the sensor gives anything but the error, "Have you kept the device in a horizontal desktop? If so there must be something wrong with Gsensor." I am debating sending the third one back. I am not sure whether to return it or not. I would give it a higher rating but for this annoyance.

It works great it does the same thing as my iPad and works great