Generated at Sun, 26 May 2019 20:23:14 GMT
Electrode, Comp-406228004, DC-prod-cdc01, ENV-prod-a, PROF-PROD, VER-19.1.1, SHA-dcc2d1bc13aca0beb170d003517affe741b47a8c, CID-1416ab5d-575-16af5cfc21c830, Generated: Sun, 26 May 2019 20:23:14 GMT

MicroJig GRR-RIPPER GR-100 3D Pushblock + Gravity Heel Kit + 1/8-Inch Leg Accessory

MicroJig GRR-RIPPER GR-100 3D Pushblock + Gravity Heel Kit + 1/8-Inch Leg Accessory

$89.00$89.00
List $124.60
Free delivery
Or get it by Fri, May 31 with faster delivery
Add a powered by Allstate
Pickup not available
Pickup not available
Sold & shipped byaSavings
<u><b>MicroJig GRR-RIPPER GR-100 3D Pushblock</b></u> <br />The MicroJig GRR-RIPPER is a patented 3D Pushblock System that offers superior precision, control, and safety on your table saw and other major woodworking machinery. It acts as a Moving-Blade-Guard for total hand protection. The GRR-RIPPER has three legs to give you three-directions of control on the keeper and off-cut workpiece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to control and feed both sides of the stock for cleaner cuts. The GRR-RIPPER’s adjustable center leg grips the off-cut piece and prevents wood burn, while the 1/4-inch leg controls the keeper piece. The powerful Green GRR-RIP non-slip material at bottom gives you a commanding hold over the workpiece for total control. Treaded grooves on the Green GRR-RIP provide increased traction on the workpiece even with sawdust. The unit’s balance support stabilizes small and narrow workpieces. The GRR-RIPPER comes with a 2-hour Advanced Techniques DVD featuring over 30 unique uses on the table saw, router table, jointer, and bandsaw stations. <p></p> <p><u><b>MicroJig GRR-RIPPER Gravity Heel Accessory Kit</b></u><br />The MicroJig Gravity Heel Kit includes five gravity heels, two heel spacers, and mounting hardware, designed to fit any existing MicroJig's GRR-RIPPER pushblock. This kit allows a seamless transition for your GRR-RIPPER from a flat pushing block to a rear-pressure pushing stick when working at the table saw, router table, jointer, or bandsaw station. Fully adjustable up to 1-inch, the gravity-operated heels drop into place and grab the tail end of your workpiece. These heals automatically retract when you don't need them.</p> <p>The gravity heels virtually eliminate tear-out and increase control and stability when feeding short or long stock on the table saw. It provides a secure backing on routing operations preventing blow out and can also be used as a template for repeat routing. It is also perfect for use with long stock on jointers.</p> <p></p> <p><u><b>MicroJig GRR-RIPPER 1/8-inch Leg Accessory</b></u><br />The MicroJig GRR-RIPPER 1/8-inch Leg Accessory is perfect for safely and accurately ripping 1/8-inch thin wood strips on a table saw. Create your own veneer strips or decorative details to make your next project a masterpiece. This accessory attaches directly to the main body or side leg of the GRR-RIPPER pushblock. It features powerful Green GRR-RIP lined bottom surface for secure traction and hold over your workpiece through the cut. This 1/8-inch Leg Accessory guides, rips, and feeds the workpiece without readjusting the fence for consistent quality and dimension.</p>

About This Item

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.
MicroJig GRR-RIPPER GR-100 3D Pushblock
The MicroJig GRR-RIPPER is a patented 3D Pushblock System that offers superior precision, control, and safety on your table saw and other major woodworking machinery. It acts as a Moving-Blade-Guard for total hand protection. The GRR-RIPPER has three legs to give you three-directions of control on the keeper and off-cut workpiece. It provides downward pressure to virtually eliminate kickback, inward pressure to keep the stock against the fence, and forward pressure to control and feed both sides of the stock for cleaner cuts. The GRR-RIPPER’s adjustable center leg grips the off-cut piece and prevents wood burn, while the 1/4-inch leg controls the keeper piece. The powerful Green GRR-RIP non-slip material at bottom gives you a commanding hold over the workpiece for total control. Treaded grooves on the Green GRR-RIP provide increased traction on the workpiece even with sawdust. The unit’s balance support stabilizes small and narrow workpieces. The GRR-RIPPER comes with a 2-hour Advanced Techniques DVD featuring over 30 unique uses on the table saw, router table, jointer, and bandsaw stations.

MicroJig GRR-RIPPER Gravity Heel Accessory Kit
The MicroJig Gravity Heel Kit includes five gravity heels, two heel spacers, and mounting hardware, designed to fit any existing MicroJig's GRR-RIPPER pushblock. This kit allows a seamless transition for your GRR-RIPPER from a flat pushing block to a rear-pressure pushing stick when working at the table saw, router table, jointer, or bandsaw station. Fully adjustable up to 1-inch, the gravity-operated heels drop into place and grab the tail end of your workpiece. These heals automatically retract when you don't need them.

The gravity heels virtually eliminate tear-out and increase control and stability when feeding short or long stock on the table saw. It provides a secure backing on routing operations preventing blow out and can also be used as a template for repeat routing. It is also perfect for use with long stock on jointers.

MicroJig GRR-RIPPER 1/8-inch Leg Accessory
The MicroJig GRR-RIPPER 1/8-inch Leg Accessory is perfect for safely and accurately ripping 1/8-inch thin wood strips on a table saw. Create your own veneer strips or decorative details to make your next project a masterpiece. This accessory attaches directly to the main body or side leg of the GRR-RIPPER pushblock. It features powerful Green GRR-RIP lined bottom surface for secure traction and hold over your workpiece through the cut. This 1/8-inch Leg Accessory guides, rips, and feeds the workpiece without readjusting the fence for consistent quality and dimension.

  • Bundle Includes
    • MicroJig GRR-RIPPER GR-100 3D Pushblock
    • MicroJig GRR-RIPPER Gravity Heel Accessory Kit
    • MicroJig GRR-RIPPER 1/8-inch Leg Accessory
  • MicroJig GRR-RIPPER 3D Pushblock System
    • 3D Force for total control of the workpiece
    • Moving-Blade-Guard hand protection
    • Helps create precise 1/4-inch thin rips
    • Works with small stock safely
  • Virtually eliminates kickback
  • Works with small stock safely
  • MicroJig Gravity Heel Accessory Kit
    • Includes five gravity heels, two heel spacers, and mounting hardware
    • Gravity heels are fully adjustable with auto-retracting technology
    • Gravity heels hook the tail end of your workpiece and automatically retract mid-board when not required
    • Provides smoother, safer, and more controlled cuts on the bandsaw station
  • MicroJig 1/8-inch Leg Accessory
    • For ripping 1/8-inch thin wood strips consistently and cleanly on a table saw
    • Attaches directly to the main body or the side leg of the GRR-RIPPER
    • Powerful Green GRR-RIP holds and feeds wood through the cut
    • Easily cleans using denatured or rubbing alcohol
    • Perfect for edge bending, veneer, inlays, decorative design, model building, and more
    • Mounting hardware is included

Specifications

Brand
MicroJig
Material
Plastic
Model
GR-10011G040
Manufacturer Part Number
GR-10011G040
Assembled Product Dimensions (L x W x H)
9.10 x 9.10 x 9.10 Inches
Customer Reviews
Be the first to review this item!

Customer Q&A

Get specific details about this product from customers who own it.

Policies & Plans

Gifting plans

Gift options are not available for this item.
webapp branch
Electrode, Comp-476596930, DC-prod-cdc01, ENV-prod-bravo, PROF-PROD, VER-29.0.16-rc-3, SHA-ff9aec16641fb333d2802aaf0fd8fbd57e84cc30, CID-b4ca8796-a55-16af5cfc1d9dd0, Generated: Sun, 26 May 2019 20:23:14 GMT