It worked very well. I don't know how much time will be long but if your headlights blurry or foggy you can use this product. P.s: Before to start to job, mask around of headlight for to protect car's body.
About This Item
- PROFESSIONAL RESULTS: Cleans oxidized, yellowed and hazy headlights
- REVOLUTIONARY COATING: Protects against yellowing and re-oxidation of headlights for up to 12 months
- HEADLIGHT RESTORER: drill powered polishing combines with sanding for outstanding results
- CRYSTAL CLEAR HEADLIGHTS: Enhances visibility & safety for night driving
- MAKES HEADLIGHTS LOOK NEW: professional, clear finish to heavily oxidized or cloudy headlights
proposition 65 reasons:WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Cannot return by mail
|Assembled Product Weight|
|Assembled Product Dimensions (L x W x H)|
2.61 x 4.61 x 10.62 Inches
Excellent results! Easy to use!
This is the bomb
This worked wonders on my headlights, and it was so quick and easy. Don't be intimidated, this really doesn't take mechanical know-how. Meguiar's worked SO much better than the one-step cream treatment that you rub on your headlights. There is no comparison.
This really works!
I have a 2006 Toyota Avalon with 205,000 miles on it. Being on the road so much, the headlights, especially the left, had some sand blasting and UV damage. I first started using Meguiars in the 1960s for a motorcycle windshield, so I trusted the brand. I read through the directions a couple of times to make sure I understood and jumped right in. I masked off the headlights, then started with the 1000 grit disc. I abraided the light evenly from right to left, keeping the disc wet with water. When I saw that the headlight was even, I wiped it off with a microfiber cloth. Then I repeated with the 3000 grit disc moving up and down while keeping the disc wet. Next, I buffed out the headlight with the buffing cream and thick pad. That's when the work really showed. After I buffed the headlight out, I cleaned it with Windex. Then, I applied the clear coat, which was sticky after about 30 seconds and let it dry. Though there are some small cracks and few pits, the lights look fabulous!
Worked Fantastic! I did two cars since I had the kit out. First time I've used it so the first car took about 40 minutes from set up to end. The second car I had both headlights done in about 20 minutes. Don't think too much, I just sprayed water while using first sanding pad MAYBE 5 minutes max going vertical, then used the other another 5 going horizontal. Sprayed off with glass cleaner (it will still look hazy), then buffed it with the plasticX maybe 3-4 min, wiped and repeated. Sprayed some glass cleaner and wiped off. Then applied the last bottle with the foam applicator by just wiping on left to right and Bam! All done and looking brand new. The only part of the old 02 Corolla that looks good is these headlights!
Get specific details about this product from customers who own it.
Ask a question