Krylon 12 oz Fusion for Plastic, Satin Khaki

Krylon 12 oz Fusion for Plastic, Satin Khaki

About this item

  • No sanding or priming needed
  • Indoor/Outdoor use
  • Dries in 15 minutes or less
  • $4.99
    + $6.25 shipping
    Sold & Shipped by Supply the Home
    + $6.25 shipping
    Get it by Thursday, Oct 27, with Expedited shipping  
    Pickup not available from this seller
    Loading options...
    Sold & Shipped by Supply the Home

    $6.25 shipping

     from this seller


    Shipping options from Supply the Home
    Oct 27 - Nov 2
    Oct 27 - Nov 1

    Pickup not available



    This item is not available for pickup or at any of the Walmarts within 50 miles of your location.
    + $6.25 shipping
    Get it by Thursday, Oct 27, with Expedited shipping  
    Pickup not available from this seller
    Customers also viewed these products

    About this item

    Important Made in USA Origin Disclaimer: For certain items sold by Walmart on, the displayed country of origin information may not be accurate or consistent with manufacturer information. For updated, accurate country of origin data, it is recommended that you rely on product packaging or manufacturer information.
    Krylon Fusion For Plastic Spray Paint

    About this item

    Important Made in USA Origin Disclaimer: For certain items sold by Walmart on, the displayed country of origin information may not be accurate or consistent with manufacturer information. For updated, accurate country of origin data, it is recommended that you rely on product packaging or manufacturer information.

    Krylon Fusion For Plastic Spray Paint

    Krylon 12 oz Fusion for Plastic, Satin Khaki:

    • The no-prep, superbond paint for plastic
    • Bonds easily to most plastics, PVC, resin, and more
    • No sanding or priming needed
    • Indoor/Outdoor use
    • Dries in 15 minutes or less
    • Fully chip-resistant after 7 days
    • Features the EZ Touch 360-degree Dial spray tip


    Color: Beige
    Recommended Use: Indoor/Outdoor
    Fabric Content: 100% Multi
    Condition: New
    Size: 11 oz - 15 oz
    Material: Multi
    Manufacturer Part Number: K02438001
    Model: 2438
    Finish: Satin
    Brand: Krylon
    Assembled Product Weight: 2.25 Pounds
    Assembled Product Dimensions (L x W x H): 2.61 x 2.61 x 8.20 Inches

    Customer Reviews

    Customer Reviews | 11 reviews | 4.1 out of 5

    4.0 stars

    11 reviews | 4.1 out of 5

    4.0 stars

    11 reviews | 4.1 out of 5

    Would recommend to a friend
    5 stars
    4 stars
    3 stars
    2 stars
    1 stars
    1-10 of 11 total reviews
    Would recommend to a friend



    Worst Spray Paint we have used

    Customer review by Tyler

    1.0 stars 10/10/2016 by Tyler
    by Tyler

    We made the mistake of using this paint to refinish a small piece of furniture. We followed all directions meticulously. The spray nozzle on multiple cans sprayed erratically leaving an eggshell finish. Still, we were committed to the project and bought several more cans and thankfully a few of the spray tips worked normally. However, when we applied the second coat of paint, it wrinkled horribly. We were conscious of the cure times on the can and waited over a week before applying the second coat to make sure that the first coat was fully cured per the instructions. At this point we have spent several days trying to salvage our project, and we have spent more than $50 on several cans of paint and we are considering sanding everything and starting over with a different brand. We could not be more disappointed.

    Spokane, WA, USA
    Would recommend to a friend? No
    Cabinet refresh

    Customer review by DiyOrDie

    5.0 stars 9/4/2016 by DiyOrDie
    by DiyOrDie

    I used the krylon Fusion paint in satin white to paint over my yellowed melamine cabinet doors in my bathroom. The paint went on evenly, with little effort, and has a great satin, durable finish. My 3 and 5 year old are constantly putting the finish to the test-- it's been a year and still holding strong! I achieved an even coverage with all 6 pieces in 2 coats. I highly recommend this product. I'm currently removing the thermofoil covering off my kitChen doors and painting the underlying MDF with colormaster primer then paint.

    Sault ste marie, ON
    Would recommend to a friend? Yes
    excellent quality paint

    Customer review by powderburns

    5.0 stars 8/16/2016 by powderburns
    by powderburns

    I have a set of steel rims on my truck that I painted with Krylon Fusion 2 years ago. I prepped the surfaces by sandblasting, degreasing, rinsing off with water and air drying. Applied a coat of paint every fifteen minutes until I had 4 coats dried, then finished them with a can of Krylon matte clearcoat. After two years of street and off-road driving the rims still look like they were professionally done with no chips or scratches in the paint. I also did a camoflauge finish on an AR-15 with the same results. My prep for the plastics and aluminum parts on the rifle consisted of degreaser and water to rinse off. Can't say enough good things about this paint.

    Miami, FL
    Would recommend to a friend? Yes
    Excellent product, very impressed

    Customer review by Keith235

    5.0 stars 8/15/2016 by Keith235
    by Keith235

    I was skeptical about how well spray paint would stick to plastic. I had a tool box that I liked but it was old, ugly, orange and faded. Put some of this stuff on it and it looks great. Beautiful smooth finish, couldn't be happier!

    Lawton, Mi
    Would recommend to a friend? Yes
    powdery residue ??

    Customer review by Marvel

    3.0 stars 6/16/2016 by Marvel
    by Marvel

    Today, I bought 2 cans of fusion to paint a 48" round, med green, older, resin top dining table used on my covered deck. chose the colors black and brown to obtain a softer, black /bronze finish. Prepped the table top per the directions on the can, then used sweeping motions, alternating with both colors. After about 30-45 min., I lightly ran my hand over the table top and found a substantial black powdery residue....Is this normal ?? Lightly went over the top with paper towels and "think" the residue was removed...but will it come back? Also finish was mottled and coverage was less than ideal. Used an entire can of black and about 25% of the brown.

    Barnstable County, MA, USA
    Works very well...always had great results!

    Customer review by Mopar11

    5.0 stars 7/29/2016 by Mopar11
    by Mopar11

    I've been using Krylon Fusion now for a couple of years now and I mostly use it to paint automotive engine covers and smaller plastic underhood plastic pieces. Part prep is very simple, just wash with soap and water to remove most of the dirt, then spray with a static repellant like Static Guard, then a good wipe down with paint thinner. As soon as the paint thinner dries, I paint the parts. If the parts are small enough, I throw them in my dedicated paint drying oven at 175F for 4 hours (when the 4 hours is up, I turn the oven off and let the parts and the oven cool off). This greatly accelerates the full cure time and the parts can go right into service! Sticks extremely well to difficult to work with plastics like polypropylene and polycarbonate, particularly after using the heat cure. Larger pieces that can't be baked are left in the sun for a few hours but are left to sit for 7 days before going into service. Another current project I am using them on is the restoration of some fibreglass Herman Miller Eames chairs. After sitting outside 20 years, a new finish is going to breath new life into these classic works of art! I've had some of the typical "issues" that people report like the "dusting", which for any paint that isn't applied in a spray booth, to be a normal occurrence. Also, I occasionally have issues with the rough finishes but I attribute that to poor paint environment, like the temperature/humidity being too high, or painting in direct sunlight. For the Herman Miller chairs, I fully expected to do a final wet sanding after I was done especially after painting the insides of the chairs which proved to be more difficult than I thought. Also, the coverage may not be exactly what the can says, coverage amount on the can is like a speed limit, it's a suggestion under ideal conditions! I'd suggest using a clip on spray handle and if possible always keep the can and the piece you are working with vertical. You can paint items horizontally (flat) but this is more difficult and your results may vary...and you will use way more paint spraying horizontally.

    Winnipeg, Manitoba, Canada
    Would recommend to a friend? Yes
    Prep plastics correctly and it works awesome

    Customer review by jpdraven

    5.0 stars 5/6/2016 by jpdraven
    by jpdraven

    Painting plastics is all in the prep work. If you prep your plastics right this paint is very durable. If you don;t prep right then it's not nearly as durable. A light sanding, and by light I mean just roughing the surface MINORLY with an extremely fine sandpaper light 2500 and then a quick 3500 grit is all you need. The sanding scuffs the painting surface just enough to allow the paint to have grooves, valleys, and pits, to lock on to. THAT'S THE KEY. Wash surfaces with soap and water. Dry thoroughly. Paint! DONE. Do that, use this paint and you'll love it. Look at the pics of the GI-JOE toy style Transformers Jets I made using Krylon Fusion Paints. Speaks for itself.

    New York, NY, USA
    Would recommend to a friend? Yes

    Customer review by Emily

    1.0 stars 5/22/2016 by Emily
    by Emily

    This is the worst spray paint I have EVER used. I am using it to spray paint a laminate counter top and it's horrible! It has dripped and run all over the place! I have already done one counter top in another bathroom in a different brand and it looked GORGEOUS! I used your brand due to a specific color and I'm having regrets! It is spotty, runny, and messy! It sprays and drips all over the place!!!! I am highly dissatisfied!!! I will NEVER buy your products again!

    Krylon Fusion for Plastic House Shutters

    Customer review by NCHandywoman

    5.0 stars 4/8/2016 by NCHandywoman
    by NCHandywoman

    It's been a year and a half since I used Krylon Fusion in Satin Burgundy for my house shutters. Originally they were Hunter Green and were very faded since they face the sun continuously. I followed the directions and I could not believe the transformation of my house! I got lots of positive responses, but some people wondered if the spray paint would hold up. I have nothing but praise for this product. There isn't any chipping, flaking or fading. I am so happy with the results and would recommend it to everyone!

    North Carolina, USA
    Would recommend to a friend? Yes
    Love it

    Customer review by Loris

    5.0 stars 5/29/2015 by Loris
    by Loris

    I used this on my outside Adirondack chairs and it worked awesome

    Was this review helpful? (2) (0)
    Thank you! You have successfully submitted feedback for this review.
    Was this review helpful?
    Would recommend to a friend? Yes
    1-10 of 11 total reviews See all
    1-10 of 11 reviews

    Customer Reviews | 11 reviews | 4.1 out of 5

    Customer Reviews

    Customer Q&A

    Questions & Answers 1 questions
    1-1 of 1 questions

    Ask a question

    If you would like to share feedback with us about pricing, delivery or other customer service issues, please contact customer service directly.

    Q&A tips and guidelines

    Q&A Exchange Guidelines

    When writing your question or answer, please follow these guidelines:

    • Do: Make sure your question is directly related to the product
    • Do: Be specific and provide as many details as possible
    • Do: Include the model number (if applicable)
    • Do: Write your question in English
    • Do Not: Include personal information (such as your full name)
    • All submitted questions and answers are subject to the terms set forth in our Terms and Conditions

    We reserve the right not to post your question or answer if it contains any of the following:

    • Any information not related to the actual merchandise or topic
    • Obscenities, discriminatory language or other language not suitable for a public forum
    • Advertisements or “spam” content
    • Email addresses, physical addresses or other forms of contact information
    • Critical or spiteful comments on other questions or answers posted on the page or their authors
    • Any imagery that demonstrates incorrect use of the merchandise
    • Anything that Walmart deems to be inappropriate, at Walmart's discretion

    Provide as many details as possible, including the model number (if applicable).

    Remember: Don’t include personal information (such as your full name).

    Preview Question

    Thank you.

    Questions will be checked against our question guidelines and posted within five to seven business days.

    1-1 of 1 questions See all

    Policies & Plans

    See any care plans, options and policies that may be associated with this product.

    Warranty Plan

    Walmart Product Care Plans
    A limited product warranty is included free for most items. With an optional Walmart Care Plan you can enhance the manufacturer's coverage from the date of purchase. Walmart Product Care Plans cover 100% of the cost for repair or replacement, including shipping charges for the exchange.

    We'll show you Care Plan options and pricing at checkout if applicable, or go to for more information.

    Product warranty:  Warranty not available for this item See details

    Warranty Information: Warranty not available for this item
    Did you buy this in a Walmart store?  Get a warranty for it here.

    Gifting plans

    Gift options are not available for this item.

    Pricing policy

    About our prices
    We’re committed to providing low prices every day, on everything. So if you find a current lower price from an online retailer on an identical, in-stock product, tell us and we’ll match it. See more details at Online Price Match.