Instructions: To Apply: 1. Best for smooth surfaces. Clean surface with rubbing alcohol, wipe gently, let dry. Do not use household cleaners. Separate strips. 2. Removes black wall side liner and apply strip to desired location. Press firmly along the entire strip for 30 seconds. 3. Remove blue liner and apply hook to strip. Make sure tab is accessible for future removal. 4. Press firmly along the entire hook for 30 seconds. Wait 1 hour before use. To Remove:: 1. Never pull strip towards you. 2. Hold hook gently to prevent hook from snapping fingers. Do not press hook against wall. 3. Stretch straight down along wall at least 6 inches until strip releases from wall. Important: Failure to follow instructions carefully may cause damage! Save instructions for damage-free removal or visit command.com. Note: apply to surfaces above 50 degrees F. Adhesive could lose adhesion above 105 degrees F. Not intended for picture hanging. Instead use Command Picture Hanging Strips, Sawtooth or Wire-backed hangers.
Get specific details about this product from customers who own it.