They adhere firmly and come off leaving no holes, marks, sticky residue or stains, providing a great alternative to unsightly, unreliable suction cups and damaging screws and nails. Moving them for cleaning or reorganization is as simple as applying a refill, waterproof Command Strip!
Instructions: Failure to follow instructions carefully may cause damage. Apply: 1. Choose a location where strips are not over grout lines. 2. Clean surface with rubbing alcohol. Do not use household cleaners. 3. Separate strips. Remove blue liners. Press 2 strips to the mounting base. 4. Remove black liners. Press to wall for 10 seconds. 5. To ensure adhesive hold, slide hook up and off. 6. Press base firmly for 30 seconds. 7. Slide hook on to mounting base. 8. Wait 1 hour before use. Remove: Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Always pull straight down. 4. Stretch each strip slowly against the wall at least 15 inches to release.
|Working Load Limit|
7 lb (3.18 kg)
|Assembled Product Weight|
|Manufacturer Part Number|
|Assembled Product Dimensions (L x W x H)|
2.12 x 3.88 x 8.75 Inches