Bondo Body Filler, 00261ES, 14 fl. oz.

Excellent product. Used it to repair metal railing. It's seems strong and has held up quite nicely. Will continue to use for any metal repairs. It sets up quickly, faster than the 5 minute time stated in the online instructions, so we worked mixed only about a 1/4 cup or less at a time to prevent drying and wasting product.

There is two products. The one is the original Bondo and the other is the fiber reinforced fiberglass fiber reinforced it's much stronger, but it's more expensive and it's harder to use, especially if you try to make a smooth finish the only way you can make it smooth is to use some plastic wrap like a shopping bag and place it over the wet fiberglass after you've applied it and then you can smooth it out with your hands because it's still has not set up is still flexible in and it can be moved around and you can make the finished smooth. You're gonna get some air bubbles and little pockets maybe but I find that's a good way to smooth it out very quick and easy and then any imperfections after you peel off after it hardens you peel off the plastic and it will be you can fill that in with the original Bondo or they have a topping now that you can use over it and fill in any little cracks or air bubbles. One thing to be careful never put the tools that you stirred up and mix the catalyst with in back into the original container. It will set off the whole container in a few days, and the whole can will be hard. Use it in a small batches, and it hardens quickly depending on how much catalyst you put in how much harder you put in you don't need to use too much but stir it up real quick don't don't delay because it starts setting up within minutes and you wanna get it put on and smooth out and let it sit within 30 minutes it's it's hard. Good luck. There is two products. The one is the original Bondo and the other is the fiber reinforced fiberglass fiber reinforced it's much stronger, but it's more expensive and it's harder to use, especially if you try to make a smooth finish the only way you can make it smooth is to use some plastic wrap like a shopping bag and place it over the wet fiberglass after you've applied it and then you can smooth it out with your hands because it's still has not set up is still flexible in and it can be moved around and you can make the finished smooth. You're gonna get some air bubbles and little pockets maybe but I find that's a good way to smooth it out very quick and easy and then any imperfections after you peel off after it hardens you peel off the plastic and it will be you can fill that in with the original Bondo or they have a topping now that you can use over it and fill in any little cracks or air bubbles. One thing to be careful never put the tools that you stirred up and mix the catalyst with in back into the original container. It will set off the whole container in a few days, and the whole can will be hard. Use it in a small batches, and it hardens quickly depending on how much catalyst you put in how much harder you put in you don't need to use too much but stir it up real quick don't don't delay because it starts setting up within minutes and you wanna get it put on and smooth out and let it sit within 30 minutes it's it's hard. Good luck.