Hero image 0 of Tigertronics SignaLink USB SLUSBHTY, 0 of 3

Tigertronics SignaLink USB SLUSBHTY

(No ratings yet)

Key item features

The SignaLink USB supports virtually all sound card digital and voice modes including FT8, PSK31, JT65, WINMOR, Winlink Express, VARA FM 1200, RTTY, SSTV, CW and EchoLink, to name a few.
The Signalink USB p/n SLUSBHTY is compatible with various Yaesu HTs that use a non-threaded 4-pin TRRS Mic/Speaker plug, as well as some Baofeng / Btech radios.
The recommended Plug & Play Jumper Module for the Yaesu HT, that use this configuration, is p/n SLMODHT. Please note that this module has a built-in resistor and capacitor that are required by the radio. You must use this jumper module with this radio, or you will need to figure out how to install your own resistor and capacitor inside the SignaLink (not easy!).
SLUSBHTY Compatible Yaesu Radios -- FT-60, FT-60R, VX-1R, VX-2R, VX-3R, VX-5R, VX-110, VX-150, VX-160, VX-230, FT-250R, VX-350, VX-410, VX-420, VX-420A, FT-1DR, FT-1D, VX-8GR
FCC Certified - Unlike virtually all of our competitors, the SignaLink USB has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Built-in Low Noise Sound Card - This provides optimum performance and frees your computer's existing sound card for other uses. It also greatly simplifies installation and operation, by reducing the number of cable connections, and by providing consistent performance that is independent of the computer's sound card.
Simple Installation - The SignaLink USB has only one USB connection to the computer, and in most cases, only one connection to the radio*. There are no computer audio cables to get mixed-up!
Works with virtually ALL Radio Mic, Data, and Accessory Ports - The SignaLink USB works with virtually ALL radios, and can be attached to your radios Mic, Data, or Accessory port. This allows most users to attach the SignaLink to the back of the radio (Data or Accessory Port) and leave the microphone plugged in!

Specs

Brand
SignaLink
Model
SLUSBHTY

Current price is $139.95

Price when purchased online

Out of stock

How do you want your item?

Out of stock

Report an issue with this seller

About this item

Product details

The SignaLink USB comes with all of the cabling needed to use it with your computer and radio (see below for a list of compatible radio models), as well as sample software to get you started. This listing includes the following items: SignaLink USB Detachable Radio cable (3ft length), Detachable USB Cable (6ft length), Jumper Wires (set of 6, cut and stripped, and ready to use - NO soldering required!), Printed Manual, Free Software CD (Windows), Allen Wrench, Rubber Feet

The SignaLink USB supports virtually all sound card digital and voice modes including FT8, PSK31, JT65, WINMOR, Winlink Express, VARA FM 1200, RTTY, SSTV, CW and EchoLink, to name a few.
The Signalink USB p/n SLUSBHTY is compatible with various Yaesu HTs that use a non-threaded 4-pin TRRS Mic/Speaker plug, as well as some Baofeng / Btech radios.
The recommended Plug & Play Jumper Module for the Yaesu HT, that use this configuration, is p/n SLMODHT. Please note that this module has a built-in resistor and capacitor that are required by the radio. You must use this jumper module with this radio, or you will need to figure out how to install your own resistor and capacitor inside the SignaLink (not easy!).
SLUSBHTY Compatible Yaesu Radios -- FT-60, FT-60R, VX-1R, VX-2R, VX-3R, VX-5R, VX-110, VX-150, VX-160, VX-230, FT-250R, VX-350, VX-410, VX-420, VX-420A, FT-1DR, FT-1D, VX-8GR
FCC Certified - Unlike virtually all of our competitors, the SignaLink USB has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Built-in Low Noise Sound Card - This provides optimum performance and frees your computer's existing sound card for other uses. It also greatly simplifies installation and operation, by reducing the number of cable connections, and by providing consistent performance that is independent of the computer's sound card.
Simple Installation - The SignaLink USB has only one USB connection to the computer, and in most cases, only one connection to the radio*. There are no computer audio cables to get mixed-up!
Works with virtually ALL Radio Mic, Data, and Accessory Ports - The SignaLink USB works with virtually ALL radios, and can be attached to your radios Mic, Data, or Accessory port. This allows most users to attach the SignaLink to the back of the radio (Data or Accessory Port) and leave the microphone plugged in!

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Brand

SignaLink

Model

SLUSBHTY

Has written warranty

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.