For Ford Edge 2011 2012 2013 2014 Headlights 9012 High/Low Beam 2pc

🚗 Super Bright LED Headlight Combo – 6000K Cool White High/Low Beam Kit

📌 Important Notes

1. Compatibility: These LED bulbs are designed to replace stock halogen bulbs ONLY – they cannot replace HID bulbs. Please confirm fitment before ordering! Unsure if it works for your car? Send us your vehicle’s make, model, and year, and we’ll help verify compatibility.

2. CAN Bus Adapters (If Needed): Some vehicles (2007+ Dodge, Chrysler, Jeep, GMC, BMW, Mercedes-Benz, etc.) may require CAN Bus adapters to avoid error messages, hyper-flashing turn signals, or fast blinking. This is not a defect of the LED bulbs and is not covered under warranty. To check if you need a decoder: Remove your original headlight bulb and see if the dashboard shows a "Bulb Error" – if yes, an adapter is required. Adapters are not included in this listing.

⚙️ Key Specifications

Plug Type: 9012 (High Beam and Low Beam)

* 1. Material: Aviation 6063 Aluminum Profile

* 2. Bulb Color: Black

* 3. Electric bills: 4-Sides COB chip

* 4. Type of light: spotlights,Headlight

* 5. Color temperature: 6000k White Color

* 6. Lumen: 20000LM/set

* 7. Power: 120W/set

* 8. Lifetime: >50000hrs

* 9. Voltage: DC 9-32V ( Fit 12V,24V Vehicle )

* 10. Working temperature: -40 °C ~ 120 °C

* 11. Heat dissipation: aviation aluminum + fan

* 12. Waterproof: IP68

*13. Beam Angle: 360°

*14.Application: Headlight

📦 Package Content

2x 9012 LED headlight bulbs(High Beam and Low Beam)

⚠️ Installation Caution

1. For safety, ensure the vehicle has fully cooled down before installation.
2. Place the vehicle in park or secure it in gear.
3. Turn off the ignition and remove the keys.
4. Avoid burns, especially when turning the vehicle’s lights on or off.
5. Do not crush, cut, or touch the bulb surface with your fingers (fingerprints can cause dark spots).
6. Fully inspect all connections (contact points, ports, wires) – faulty connections may cause lighting issues.
7. When adjusting the bulb, ensure the end does not touch the headlight’s interior light shield.