Workbench for Garage,ENJOYWOOD Heavy Duty 48 inch Wood Work Bench with Drawer and Wall Mounted Shelf,Rubber Wood Tabletop,2000 LBS Load Bearing Workstation Garage Desk Table Worktable

This workbench was very easy to assemble and it is very sturdy. I would say it is definitely worth the reasonable price.

Let's start with the %231 glaring issue, no lower braces (left to right) which leads to the bench wobbling from side to side. I added the top of a 41" Kobalt Tool chest onto the bench to act as a temporary home until I can afford the matching lower. Immediately, I realized that I am going to need to make my own lower braces to keep the bench from acting like a folding table after I fill it the tool chest with tools and someone leans on the side of it expecting it to hold. Now let's talk about glaring issue %232, the drawer is flimsy, extremely flimsy. I also ran into fitment issues that won't allow me to install the drawer as the rails just won't reach. It appears that my drawer parts were cut about 1/4" too narrow and there is a gap where the rails should match up. I attempted to loosen all of the bolts in the drawer to make it fit, but no good. BTW, the drawer does nothing to address the wobbling issue of the whole assembly due to the lack of lower supports. I have already spent the money and I need something in my garage in the short term, so I will grab two 1'x2's I have laying around and will brace up the lower frame, but I cannot suggest this bench to others. BTW, the 60" model has got to be worse given the issues I saw in the design/manufacturing on the 48" model. A set of lower braces, even with the thin metal they used in some of the structural points, would make this a better bench. Best of luck. P.S. While not a show stopper, the shelf that came with this bench does not match it as closely as they show in the photos (it's night and day). See my pic below.