Receiver,Female Xlr Ism Receiver Par Party With Receiver Led Receiver Ism Ism Party Antenna Female Party Receiver Ism

Lixada 2.4G ISM DMX512 Wireless Female XLR Transmitter Receiver LED Lighting for Stage PAR Party Light with Antenna 7 groups code settable, user can use 7 groups individual wireless net without any interfere each other in same place. (Tricolor LED displaying Indicators) This product adopts a 2.4G ISM frequency section. High effective GFSK modulate, communication design; 126 channels jumping frequency automatically, high -jamming ability. 126 channels jumping frequency automatically, high -jamming ability, to ensure works reliability. DMX512 wireless / receiver transmits standard DMX512 protocol data (generated by console) by wireless way. No time delay when signal data is transmitting, signal data is real time and reliably.

Establishing Communication
1. on DMX512 wireless received board first and then following to transmitted board.
2. Press “Key” button to set same value of transmitted board and received board. Please use different value if you need use more than 1 group wireless universals at same time in same place.
3. red LED flashes when transmits data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received same value, more data, faster LED flashes.
4. Communication was established correctly.

Specification:
Communication distance: 400M (visible distance)
Item size: 21 * 2.5 * 2.5cm / 8.26 * 0.98 * 0.98in (L * W * H)
Color: Silver, black (optional)
Package weight: 180g / 6.36oz
Max transmitting rate: 20dBm
Receive Sensitivity: -94dBm
Work frequency section: 2.4G ISM, 126 channels.frequency section
Transceiver: Receiver, (optional)
Input voltage: 5VDC 500mA MIN
Package size: 14.5 * 10.5 * 4.5cm/5.7 * 4.13 * 1.77in (L * W * H)
2.4G wireless DMX512 R / T
connector: 3pin male
Plug standard: , , UK, AU (optional)
Material: zinc alloy +


This wireless / receiver can help you to get rid of countless wire.

Package list:
1 * wireless / receiver
1 * Specification (English)
1 * Adapter


Operating manual:
code and LED color corresponding relationship:
1: RED
2: GREEN
3: RED+GREEN
4: BLUE
5: RED+BLUE
6: GREEN+BLUE
7: RED+GREEN+BLUE
1). Press momentary switch above side led indicator to indicate setting.
2). Press again to set IC, to color desired, adding 1 each time you press switch will advance color IDcode.
3). Working condition:
LED constant lit : No or wireless signal.
Red LED flash: Transmitting.
Green LED flash: Receiving
4) frequency 2.400 - 2.525G, total 126 channels, it' s searching automatically.
5). Code "1-7" groups code, press 'KEY' for setting, it only can work under same code of and receiver. (Same LED Color)