Blower Wheel for Frigidaire, Electrolux Dryers, AP2106979, PS417911, 131476300

Keep your dryer running efficiently with the 131476300 Dryer Blower Wheel. This replacement part is designed for select Frigidaire, Electrolux, Crosley, Kenmore, Gibson, White-Westinghouse, Tappan, and Kelvinator dryers, particularly stackable units and laundry centers. It attaches to the drive motor shaft, circulating air through the drum and exhaust vent for optimal drying. Fixes issues like poor drying, loud noises, or no airflow, offering a cost-effective alternative to OEM parts.

What’s Included: One blower wheel.
Important: Disconnect power before installation. Check exhaust venting for blockages to prevent repeat failures.

Replaces Part Numbers: 131476300, 1314763, 145746, 145746-A, 473, 5303212513, PD00000288, EAP417911, AH417911, AP2106979, EA417911, PS417911.

Compatible with models including but not limited to:

• Frigidaire: FEX831FS0, GLGT1142CS0, GLGT1142CS1, FFLE3911QW0

• Kenmore: 41761712510, 41761722510, 41771722510, 41790802990

• Crosley, Gibson, White-Westinghouse, Tappan, Electrolux: Select stackable dryers and laundry centers

Verify your model number or contact our support team for assistance.

• ✅ Brand Compatibility: Fits select Frigidaire, Electrolux, Crosley, Kenmore, Gibson, White-Westinghouse, Tappan, and Kelvinator dryers.

• 💨 Efficient Airflow: Ensures proper air circulation for faster drying and reduced noise.

• 💰 Cost-Effective: OEM-equivalent performance at a lower price.

• 🛠️ Easy Installation: Installs in 20–30 minutes with a screwdriver, pliers, and gloves.

• 🛡️ Reliable Fixes: Resolves poor drying, loud noises, or airflow issues.

• Part Number: 131476300

• Component Type: Dryer blower wheel

• Material: Plastic (semi-gloss finish)

• Mounting: Attaches to drive motor shaft

• Operating Conditions: Suitable for high-heat dryer environments

• Compliance: Prop 65 warning for California

1. Safety First: Unplug the dryer from the power source.
2. Access the blower wheel by removing the dryer’s front or rear panel (refer to manual).
3. Loosen the clamp or set screw to remove the old blower wheel.
4. Install the new XPARTCO 131476300 blower wheel, securing it to the motor shaft.
5. Reassemble and test for proper airflow.
6. Tip: Clear exhaust vents to ensure long-term performance.

Shop now with a 30-day return policy for a reliable, budget-friendly fix!