JENSEN J12W 12" 1200w 4-ohm Car Audio Subwoofer+Vented Sub Box Enclosure

Package Includes:

(1) JENSEN J12W 12"" 1200 Watt Subwoofer 4-ohm Car Audio Sub w/ 40oz. Magnet

(1) Rockville RSV12 Single 12” 1.22 cu.ft. 3/4"" MDF Vented Subwoofer Enclosure Box

(1) Complete Single Sub Box Enclosure Installation Kit: Speaker Wire, Screws, Spades

Features of J12W RB:

• 300 Watts Rms / 1200 Watts Peak
• 40oz. Magnet
• 4-ohm Impedance
• Double Stitched Rubber Injected Surround
• Works In Sealed And Ported Enclosures

Specifications:

• System Type 12″ Subwoofer
• Impedance 4 ohms
• Frequency Response 27Hz-350Hz
• Total Peak Power 1200W
• RMS Power 300W
• Efficiency 1W / 1M 90dB
• Efficiency 1W in-car 89dB
• Type Subwoofer
• Diameter 12″
• Woofer Cone Material Polypropylene
• Woofer Surround Material Double stitched rubber injected
• Woofer Magnet Weight 40oz.
• Woofer Basket Stamped steel
• Mounting Cutout 279mm (11.00″)
• Mounting Depth 5.75″
• Fs 30 Hz
• Qts (Total Q) 0.566
• Qes (Electrical Q) 0.595
• Qms (Mechanical Q) 11.701
• Vas 92.354 L

Features of RSV12:

• Rockville RSV12 Single 12"" Vented Subwoofer Enclosure
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 3/4"" USA Heavy Duty MDF Construction
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• High quality GOLD spring loaded terminals
• Designed, tested, and engineered to work with most of today's popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.