Features:
*Note
1. It's high Amp item, and the device needs certified and professional electrician for wiring.
2.The frequency of the wireless router is 2.4GHz.
3. The meter requires the measured device must have neutral wire. otherwise it can't measure the device's voltage, current, and power
When you install the CT , please note the CT's direction, make sure all 3 CT with the same direction.
Please make sure the main power is off when you make the connection
Single/3 - phase electricity compatible
• Three current transformers for Single phase application
• Measures real-time Voltage, Current, PowerFactor, ActivePower and total energy consumption
• Display the temperature of the device on the App
• Suitable for both residential and commercial application Important safety information:
• The power clamp must be installed and serviced only by a qualified electrical personnel.
• Do not touch the terminals of the device during testing.
• Turn off all the power supply for this equipment before installing.
• Always use a properly rated voltage sensing device to confirm power is off.
• Replace all devices, doors and covers before applying power to the equipment.
Failure to follow these instructions will result in death or serious injury.
Specifications:
Wi-Fi • 802.11 B/G/N20/N40
RF Characteristics
• Operating frequency: 2.4GHz
• External antenna
• Output Power: Up to +20dBm
Physical Specifications
Operating Voltage • 100~240 Vac 50/60 Hz
Calibrated Metering Accuracy • ≤ 100W Within ±2W
• >100W Within ±2%
Reporting Cycle • Every 2 seconds
Clamp diameter
• 80A (default): 10mm
Operating environment •Temperature:-20 ℃~+55 ℃
•Humidity: ≤ 90% non-condensing
Dimension • 86(L) x 86(W) x 37(H) mm
Package Contents:
1 x 3-phase energy KWH counter.
1 x antenna.
3 x circlips
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
WARNING: 