4G LTE USB WiFi Modem 150Mbps Unlocked 4G WiFi SIM Card Slot Built in 3200MAh Wireless Portable WiFi Router

Feature: 1. 4G WIFI HOTSPOT: Portable mobile WiFi does not require a broadband connection, just a 3G 4G SIM card to connect to a 4G network. It provides extremely fast internet speed for your device even when there is no 4G network. 2. 150MBPS HIGH SPEED: Unlocked 4G WiFi supports LTE CAT4 standard with 150Mbps high speed internet access, mainly depending on the signal strength. Supports network bands B1/2/3/5/7/8/20/40. 3. MAIN FEATURES: Portable WiFi has a SIM card slot and a 3200 mAh battery. It can work with external power supply, no working time limit. It can be charged through computer USB port, car USB charger, power supply. 4. CONNECT UP TO 10 DEVICES: 4G LTE portable WiFi can connect up to 10 devices at the same time, supporting smartphones, tablets, laptops, etc. The effective distance of WiFi can get to 10m/32.8ft. 5. USING METHOD: Insert the SIM card and install the battery. Even if your SIM card is compatible with the hotspot WIFI device, it may not be plug and play, you may need to disable the PIN code of the SIM card and modify the APN. 6. APPLICABLE SCENARIOS: 4G LTE USB WiFi modem is small and lightweight, suitable for party, travel, business trip, work, outdoor live streaming, playing games, car WiFi, etc. Specification: Item Type: 4G LTE USB WiFi Modem Material: ABS Color: White Product Size: Approx. 10x6x1.5cm / 3.9x2.4x0.6in Battery: Polymer Lithium Ion Battery (Built In) Capacity: 3200 MA SMI Card Slot: 1 x SIM Card (Without SIM Card) Network Band: B1/2/3/5/7/8/20/40 Sharing: Up To 10 Users Interface: Type C How to Use: Remove the product and use it Package List: 1 x 4G LTE USB WiFi Modem 1 x USB Cable 1 x Instruction Manual Note: 1. Please allow some error due to manual measurement. 2. If WiFi dongle works for a long time, it needs to dissipate heat. Otherwise, it may cause the chip to burn out. 3. Enter the IP address of the router: 192.168.43.1 and click Network APN Enable. modify the APN. make sure the SIM card is active. 4. Product support network band: B1/2/3/5/7/8/20/40. The SIM card used must support these frequency bands, and the local signal of these frequency bands can be used normally. 5. The product's battery electrodes are covered with an insulating sticker, which needs to be removed before installing it into the machine and turning it on for use.