Rail and stile door construction has been around for centuries and is the most common way to build doors for cabinets and furniture. Our rail and stile router bits will enable you to create your own frame-and-panel doors. Cope the ends of your rails with one bit, and then switch to the second bit to route the inside edge profile in all your door parts. The included panel raiser cuts the artistic profile on the center panel which reduces the panel's thickness to properly fit in the door frame's groove. Included in this set: Ogee Raised Panel Bit, 2 bit Matched Ogee Rail & Stile, Reversible Glue Joint Bit, Allen wrench plus extra spacers, Solid wood storage case. Use with up to 1" stock. Rail & stile bits create a perfectly matched rail & stile door frame. The raised panel bit puts a classic ogee edge on the central panel of your door. Use the reversible glue joint bit for gluing up multiple boards to extend panel width. The glue joint bit will rout both joining cuts. Simply set the center of the bit with the center of your stock. Then, run one cut face up and the adjoining cut face down creating a perfect joint. Fully enclosed ball bearing guides allow for precise cuts without the use of a fence. Two flute carbide cutters & 1/2" shanks. Set comes in a solid wood storage case.
