6 inch Vertical Vacuum Suction Cup w/ Metal Handle for Flat to Curved Surfaces

1Pcs 6'' Vertical Vacuum Suction Cup w/ Metal Handle for Flat to Curved Surfaces

Description

Handling heavy glass/tiles by hand is not only slow but also dangerous. This vacuum suction cup can lift the glass/ceramic tile/fish tank/plastic/steel panel so that you can finish your work faster and more safely and enjoy your free time. You just need to put it on a smooth surface, press the hand pump, and then the vacuum suction cup will produce a vacuum, firmly adsorbed on the plane. Its excellent load capacity makes you not only more relaxed but also worry-free.

Details

High-quality Hand Pump: High-quality ABS hand pump is designed at the top of the handle, which is more durable and environmentally friendly than ordinary plastic.

Protective Cover: It uses a yellow protective cover to cover the rubber suction cup so that you can better protect the suction cup from damage.

Application

It is very suitable for lifting and moving large glass, windshield, ceramic tiles, aquariums, furniture, plastics, metals, stone plates, electrical appliances and other materials.

Specification    

Material: Stainless Steel+Rubber

Color: Green+Yellow+Black

Style: Ergonomic

Applicable Surface: Flat/ Curve Smooth Surface

Max Horizontal Load of Each: 75kg/165.35lbs

Max Vertical Load of Each: 60kg/132.28lbs

Package Size: 19*15.5*15.5cm/7.48*6.1*6.1inch

Product Height: 18.5cm/7.3inch

Product Diameter: 15cm/6inch

Gross Weight: 0.8kg/1.76lbs

Net Weight: 0.7kg/1.54lbs

How to Use

1. Place the suction cup on the contact surface so that the red line can be seen when lifting the load.

2. Pump the plunger until it is fully connected. When the red line is hidden, it indicates that the vacuum is sufficient.

3. If the red line appears during lifting, please immediately put down the load and pump the plunger until the red line is hidden again. 

Package Included

1*Vacuum Suction Cups

Notes

1. Please always inspect vacuum suction cups before use. Clean them and the load surface between each lift. Make sure both surfaces are dry and free of any dirt or obstruction. Make sure the handle pump has enough lubrication for the pump.Please check whether the elasticity of the vacuum suction cup is good and whether there is damage and obvious abnormal distortion.

2. Before use, please test the suction of the vacuum sucker on a small piece of material. Clean the surface with soap and water with a clean sponge or lint free cloth.

3. Please use it on a clean, relatively smooth, non-porous, oil, grease or water-free surface at a temperature of -12-49℃/10-120°F, because water or pollutants will reduce the skid resistance of the cup.

4. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.